Hello and welcome to the section. 1 course introduction and
lab setup.
This is the first video of the section one and we're going to talking about
setting up a lab environment and how to configure it.
As I mentioned before, this is some requirements for
this course, for example, for your configuration of your system. We
need at least four key while Ram or eight key word is optimal and
also establish internal connection and at least 50
gigabytes of storage on your system. Also, we
need to Virtual Machine. The first one is a Kali Linux that
we're going to use in my pond it and the second one
is for our Target Windows 7 or 10 Way based on your decision. So
in further slides, we are going to talking about the virtual
machines and
We chose isshin. Are we going to use?
But you may wonder why Kali Linux kelleners
always is based on the Unix and Linux open
source suppression systems that designed specifically
designed for pension testing by offensive security.
If you scroll internet, you
can find many 0s that based on a Unix and
Linux such as opencorporates. But k x
is one of the good one for this main of Preppers. So
as I mentioned before, we need to virtualization environment
to practice and there are scenarios,
For example, I'm doing we a requisition in this course, but
you can also use the Oracle virtualbox. That's
three, but we wear that
if you using, which a machine that's
supporting William, where the file type is
e is 0, and for Oracle virtualbox is
all we ate. So if we want to download Kali, Linux were
one of these be aware of that file type
and image name.
As you can see in the picture here, you can see the OVA file
name and image name. That is specifically designed for
oil, Co with Dropbox.
Let's go to the configuration of each machine.
No matter which we chose ation environment IE using
but after him the embera radical are
using the same system to create a new virtual machine.
For example, in VMware when you click on
and create a new virtual machine, there's a
window.
To start. You can't use a typical one that
is recommended by yourself.
And click on the third one. I will install the pressure system later.
Choose our pressure system here. For example, when I install Linux,
here, we can choose the version for example, but you can change
that name later.
Yeah, we're going to choose a name for
our virtual machine, which is
code, red and Linux.
And then choose the location for that.
And then next year,
we can choose our maximum disk size
firm machine. This person. You,
but I will suggest to keep it on a 25 Maybe.
I'm going to click next and finish.
Also finished here.
It's going to create automatically. We're going to click on a CD
DVD set up.
Because of first we want to use that image file, you
can browse your computer and choose days of followers is
mentioned here. If you are using a, which I'll
box Oracle.
It should be OVI and do not click on, okay.
That's great.
I didn't power on this virtual machine. We're
going to wait.
To its power on.
Consider smile Windows here.
It's going to be okay later after we install it. We
scroll down to install or graphical install.
I'm going to wait for another step.
It's going to lead us to the installation purpose. Now.
We can choose the language. I'm going to go with the
English United State American English.
We will wait to slow down the
solution component from the installation media. It's going to
take a few seconds.
After this finish is going to go into the detect Network Hardware, after
its diagonal.
Going further process configuration and network. I'm
going to wait a few seconds more here. We're going to choose
a house. Never going to choose a color Linux.
Or you can choose anything you want.
An endowment name, just keep it away.
You should choose a root password. The password is the most important
things, your configuration. Try to
remember the root password because it is the
high level of the axis in your calendar
system. So if you just kind of put a
password in it,
Twice, to make sure of it, confirm it.
Just click on continue and next, it's going to detect disks
in this step. I'm going to assume
something important.
About a partition disks after it's finished. So
if your pro user professional,
you can going with the manual, but
if you are using the calendar that
the first time, maybe we can go with the use entire
disk.
And do not make partition discs by real suggest
that do at least go with the use partition entire
disks and set up your lvm. But
you just going to keep it simple and use the entire disk.
Will continue.
And if your new user as it's recommended for
yourself, all files in one partition, but it's
know if you're a pro go with a separate home. We
are on TMP partitions. So
just gonna keep it off with your new
users and user friendly.
First partition, right changing to discs.
I'm going to click. Yes, and
we'll waiting for installation for
the system.
It's going to be taken minutes. So maybe want to take your time.
So after it's finished, you
visit to new message here.
This is for educational purposes. You can click no, but
if you want to install it again, you want to have
no updates and software available. We can click yes and
continue. And wait for the configure, the
package manager.
We're going to wait for the install the GRUB boot loader on
it. Hard disk.
It's also gonna take some few minute.
So we're going to wait till finish.
So after it's finished, this is the way we're
going to click. Yes and continue and this is Step. We're
going to click on the second one continue.
Reckon, we're going to wait for it to the process finished
and couple installed on our system. And
then finally, we're going to face the message at
the installation of new finished. Click on continue.
And now we are facing to the Kali Linux, gy installation
and the final step in
our face a GUI or graphical environment
of Kali Linux. So I welcome you
to the Kali Linux for the first time. If you're using it, you
can see the logo on it.
so, as every person we're going to face to
the
Login page, we're going to click root and then the
password that we choose our fur.
Then we can create a new user for it if
you intend to.
So now, when you wonder what should I do with this weight
on this screen? I want to full screen. Well,
that's easy stretch. Click on your video.
And click install, VMware, tools. It's gonna
install it dramatically.
Are, is it if there are few second, you
can make change.
I click on this icon and make it full screen. We
were tools. Also could
be able to copy and paste the things from your system. To
your virtual machine is a kind of useful tools.
You may want to install it. So this
is from a machine. Let's get to the
installations and configuration for
the network. But click on the ceiling.
You got to make sure that your network connection is
on Nats connection. I'm
going to explain Annette's connection later, but make sure it's not
a connection, not all slowly or not Beach. Net only.
We're going to test our networks in
the further video and
how to work with the comments line in the Lennox.
Let's go to the setting again and check out the
configuration of your system. In this step.
We can choose the customizes memory for
your system. For example, my memory, my Ram of,
my main system is turning your lights so
I can increase it as much as I can.
But the limit is my maximum recommended memory. So
if you have lots of
gel Winters operation system, you can increase the ram. But
before we go a ramp, is the recommended by
us? And the process is two is
good and hard disk that we choose at the first step is
25 GB, so wedding set and
our network adapter is net. So we
also talked about network connection that we also
mentioned that it should be net.
And we cannot talk about how to customize your
network connection. Later.
Let's review our topics. The first step.
We going through the introduce. Each
requirements equipped with around their comments and why we need
them. The second part. We told
you how to install the machine and your system. Step-by-step
installing machine is each machine
is step-by-step and explaining each setting for
deep understanding and then the last step, configure
the lab and network set up spending about a configuration of
each lab and the network setup to make a
a lab for our training and scenarios. So
the next video is the second video
of the section one and it's going to be testing our Labs environments.
As I mentioned that we're going to work with
the Clinic's comment and just going to explain it a
little bit and to make sure it's going to be worked and
everything set on our lab and Link it together. Our
Windows Target under Linux. Stay, where
you going to use it for pressure testing. Good luck.