OK, so welcome back in this story, you will learn which wireless adapter you should buy for wireless
penetration testing.
So to Echo Wi-Fi network, you need a wireless cord which supports monitor mode and packet injection.
Now, for those who don't know, Monitor Mode allows you to capture data sent and received by wireless
devices, and packet injection allows you to inject malicious package into a network.
Now, the first step before you buy a wireless adapter is to identify the chipset for the wireless card.
And you can see a list of the chipsets that supports monitor mode and packet injection, so make sure
the adapter, which you want to buy, contains a compatible chipset.
OK, now let's see how to taste the wireless card for monitoring monitor mode and packet injection.
And to do that, I'm going to switch to my colleague Linux machine and open the terminal.
Now, if you are a complete beginner and you don't know how to install Kali Linux, watch my wife by
hiking for Beginners course.
So here in the terminal type W config to display all the wireless interfaces on your system and you
can see the wireless interface name is w.ll, n0 no less.
The wireless card into monitor mode by typing Erman and G start W than zero and then type a w config
again, and you should see a new interface named W LAN zero Mon wi the mode monitor.
This means the card has been successfully put into monitor mode.
All key noticed is the wireless card for packet injection and to do that type airplay and G Dash Dash
based W LAN zero morn and press enter to start the test and you can see the injection is working and
here on the last line, the percentage should be 100 or a very high percentage.
And if the number is zero, then it means that your wireless card does not support injection.
So thanks for watching and I will see you next time.