Hey, everyone, welcome back to the
course. So in the last video, we
went ahead and wrapped up our lab on
a Wireshark. So again, we did some
introductory type of commands
and captured some information.
Now, in this video, we're going to
cover Wireshark again.
This is actually a little shorter.
Labrada going to basically be
capturing some more information,
actually, in the hopes of capturing
a username and password that we
enter in, but we'll see how we do.
Now, I want to mention again that
all these step by step guides are
available in the supplemental
resources section.
You can download those yet.
Be sure to do so.
It makes your life a lot easier as
you're trying to follow along with
these labs.
I also want to mention in the
supplemental resources, we have a
lot of other information that's
very beneficial to you, specifically
information created by some of our
awesome teaching assistants that
help create specific stuff
on Wireshark and E.S.P.
Don't give you a lot more background
on those particular tools.
So really cool stuff I've looked
through. It is really, really
awesome.
I'm actually a little jealous.
I was like, man, they create some
good stuff.
But anyways, digressing
a bit there, but make sure you
download this stuff and that's what
we created for.
That's why we put it in the course
so you can actually use it.
We don't want it to collect us, so
use it to study it.
If you're going to be a pen tester,
you definitely want to know
Wireshark in depth and also
Tsipi dump as well, depending on if
you want to use a guey or a command
line tool.
So again, just make sure you
download the resources and use it.
So all digression aside, let's go
ahead and get started with our lab
now, we're going to go ahead and
actually go into the ethical hacking
lab environment, specifically where
this particular lab I want to use
is. So here in cyber, you should
be logged in already and then you
type in the search box here,
certified ethical hacker.
And actually, as you start typing
it, you'll see it'll start pulling
it up so you don't have to type all
of that in there.
It's going to be this certified
ethical hacker one right there.
So you go ahead and click on that
and then select a launch button
there.
It's going to prompt us like a
normally does to open it and
basically a new tab.
So this launched the item there.
Click on the launch item button and
it should launch it for us.
Usually doesn't take too long to
launch this particular environment.
And you'll see it's already launched
for us.
Let's go back to the lab documents,
so where we want to go to
is we actually want to go down to
the packet sniffing labs.
If we come here and we go down just
a little bit on the left side
here, you'll see that we have our
packet sniffing lab.
Now, mine, of course, is in progress
because I've messed with these labs
before.
But you should just say Takar
sniffing on it.
Once you find it, just go ahead and
click on it and then click the start
button there, you'll notice all
your virtual machines on the side
here. We want to go ahead and get
all those turned on
by default. Usually the server one,
usually the top one starts booting
up for us.
But everything else we normally have
to do ourselves. So the way we do
that is we just have our mouse over
top of each one and just hovered
over top like that and then select
the power on option.
It's it really is that simple.
All right. So just to that for all,
then it's going to take a moment or
so, probably about 10 to 20 seconds,
usually in most cases, to boot all
of them up.
So I'm going to pause video and wait
to mine come up and you can just
pause video as well on your end and
wait until yours come up so we can
all start the lab together.
Hey, everyone, welcome back.
So it looks like might have all
booted up for me if your virtual
machines have not booted all the way
up yet, then go ahead. Just pause
the video again and wait until yours
all show this little green, pretty
color and so on.
Now, one of the thing I want to note
in this particular lab environment,
so with this this ethical hacking
lab and the and also the capstone,
when you go ahead and do that as
well, it's the same type of
environment down here near the
bottom left. You notice it has this
auto logo thing.
So basically, if you aren't
doing anything for a period of time,
it's going to lug you out after
basically an hour.
All you have to do to give yourself
more time is just click on that and
you'll see it kicks it back up to 60
Minutes. So if you're doing these
labs on your own, if you pause
videos or anything like that and you
want to take a little longer, then
just make sure you're keeping an eye
on this timer here and then you just
click it to kind of give yourself
more time.
I have yet to find a limit on that.
I can click it literally and
and just kind of took my time like
four hours in labs before
just playing around and seeing what
I could potentially break.
So just keep that in mind. Just make
sure you are mindful of the time.
And that doesn't seem to be any
limitation on how many times you can
click it. So please
don't use it for nefarious purposes.
I'm not sure how you would, but
potentially maybe.
I guess probably not really, but
it's all good.
All right. Back to our lab
documents. Stop.
And again, they're so
beautiful. Our virtual machines now.
Now we're going to click on the Lab
D M0 once it's a second machine
there. So let's go ahead and click
on that.
So just go ahead. Click on the name
there. It's going to take a second
or so to establish a connection.
We may also see a server management
window open up and we see it's going
to open up. There are just X out of
that. We don't actually need that X
out of that.
And it should take a second or so
and then it should close for us.
I go back to our lab document.
Ah, so the next thing we want to do
is we're going to launch Wireshark
in this particular area.
So step down here is just launching
Wireshark. It's down to the toolbar
there. It's a blue color, little
sharkskin icon here.
So it's this one right here down
near the kind of in the center or
the bottom. Right.
So once you click on that there.
We want to select the Internet
three, so just go ahead and click on
that. That's when we want.
All right, and once we select
that, we're just going to double click
on that and then we're going to go
over to the Windows 10 machine, so
just double click on this and a
three.
It's going to start the Wireshark up
for us. And now we're going to click
on the Windows time machine.
So this Quinten machine,
lets go ahead and click on that
again. It might take a moment or so
to initialize everything and pull
the desktop for us.
Once it pulls up for us there,
we're going to double click on the
Pudi shortcut icon.
So this one right here looks like
two computers communicating
with each other.
And that's what we're trying to do
here. We're going to try to
establish a satellite connection.
So let's go ahead and do that now.
So we're in a double click on PUDI.
And then we're going to select the
telnet radio button, so it's just
basically the circle, if you're not
familiar with what a radio button
is. So just click the button next to
Telnet to make sure we select that.
In the Hosteen field
here in step 14, we're going to type
in this IP address,
so let's go and type that now.
So here in this Hosteen field,
we're going to type in 192
dot one six eight zero
one.
And we're going to leave that as
poor 23 again, we want to do telnet,
so that's the by default, that's a
poor number for telnet.
The next the next thing we're going
to do is click the open button at
the bottom, so we want to see if we
notice any error messages.
So they click the button there and
we should get an error message here.
And we do.
The connection is refused.
So basically what that can tell us
is that maybe Telnaes not actually
running on that particular device
or it may not be listening.
Maybe they configured it not to
listen for 20 on IronPort.
Twenty three hours.
Let's go and try our other server
now. So again, it's the one we were
just at the lab, DM's or one.
So we're just going to basically
type in the IP
address for that one there as well.
So let's just say, OK, there, and
I always like to close out party
makes life easier.
So just out of that and then we're
just going to double click on Pretty
again to launch it.
And when I say it makes life easier
just on this particular lab, it
will work more efficiently if you
just do it like that.
All right. So we're back at our
little pop up box here.
Same thing. We're just going to
select Telnet and now we're going to
type in the IP address, which I've
listed here for you for the lab
DMS. You're a one machine.
So here in step 19, we're going to
type in this IP address.
So basically the same thing.
What has changed in the last number
to be two instead of a one,
then we're going to do the same
thing. We're going to select the
open button and we're going to see
if we get a connection established
with the server.
Now, once we do that, we're going to
type in this username and password
here. So we're going to type in an
administrator and then password with
a capital P, and then that's
actually a zero and not a capital
O.
So we'll go ahead and we'll do that
in just a moment here.
Let's start off first things first
here in step 19, type in our IP
address and select open to establish
our connection.
So, again, what we're going to type
in here in the hostname box, we're
going to type in one of the two
one six eight zero two
this time.
And then just click the open button
right there.
You're going to see it's going to take
a second or so, but it's going to
establish a connection for us.
And then once it establishes that I
will enter our using password, I'm
going to pause the video there will
establish this connection.
It takes a few seconds or so.
And as I was talking, it looks like
it did that. So we'll continue on
here. Got a few minutes left.
So let's type an administrator
for our for our username.
Excuse me.
Hit the andrikienÃâ.
Your keyboard again.
Password is going to be the word
password with a capital P and then a
zero instead of an O, so capital
P, then lowercase as
s w the number of zero
lowercase R d and
then just press enter the keyboard.
You notice it doesn't actually show
you as you're typing in the on the
keyboard there for the password.
That's to be expected.
So just FYI on that, so just
make sure you're typing things
correctly.
All right. Once you type that in and
hit enter and keyboard it's going to
establish the connection for us.
So I'm going to go and play the
video there and we'll pick the video
back up in the next video and
continue on with the lap.