Welcome back guys to video number 6.4 and this video.
We are going to set up a ttn gateway to
things stack Network. Okay, the things
Network actually the new name is the things stack. Okay. So
here's our indoor Gateway and we have a
two option to give up power one is a USB and the other
is a socket we can
just use that if you are doing a configuration.
then use that USB and if you
want to deploy at a standalone after a configuration
then just
Complete a configuration and plug into the socket.
Okay. So before moving on we need
to
Just read some data here. Okay.
Here we will get the device UI detail.
Okay, and
the device Mac address Wi-Fi password and some
other details that we need to use. So before moving on
you need to copy that device password because it will be
used in the for the configuration. Okay. So right
now I'm going to just give it power using the USB.
And you will see.
That light is blinking, but it's not showing the hotspot 4
before moving on we need to.
Put that device into the setup mode. So just
press on that button set up button and
wait for a few seconds.
Now you see we are in setup mode and
we will connect with the hotspot that has
been provided with that device to configure the Wi-Fi
network and copy the device you have for the further step.
Welcome back guys. Okay. So here is the the things
network, but before moving on we need to connect with the
hotspot and here you will see the mini Hub 803
D for a we
need to connect with the Gateway by specifying
the password which is mentioned on the back of the device.
So
yes, we need to put the key here.
And now we are good to go with that.
Navigate to the browser you open a
new tab and type 1 9 2.168.4 dot
one access.
yes, now you we can
see here the
Gateway UI that will be used in the Gateway set
up on the ttn.
And this is the device AP Mac Wi-Fi AP password
and we are good to go with that. Okay, firstly copy that
one because we're going to use that and here
we need to connect it with our Wi-Fi network.
Okay type the password Here.
And we are good to go with that. Just click on Save and
the reboot, okay.
Okay, and now it's starting rebooting and
here you will see that device.
Where has been changing and turn to the green? Okay now come
back to the portal. Here we have.
That things Network and I log in here. Just click
on the console.
And allow the location so it will
provide you the exact colorist and I
know it's showing as the Australia one cluster where
you can also choose according to your the requirement. You
are a part of the North America, but that's
good and select the country according to
your
a region Okay, click on that.
and here we have our two options create an application and
Register Gateway, so firstly click on the register Gateway.
Okay, put the device eui that
we copied paste and confirm
and we're good to go with that.
Okay claim authentication code. Okay.
Yes. Now we need
to mention the Wi-Fi password here. You
will see it is typically printed on the box or on the device.
Example for the things indoor Gateway the claim
authentication a code is the Wi-Fi password printer on
the device. So here I need to provide the password.
Why would
Okay, and there's a device Gateway and
we need to select the frequency plan. So every we
need to select the 863 to 870 megahertz
sf9 for rx2 recommended
because my Gateway is 868.
So I'm using that one claim Gateway.
Okay already exist.
Show the details. Yes.
Okay. Yes. We need to get your ID to modify to
make it a unique regards already.
I connected that so you can type new or
you can say that.
Try one. Okay claim Gateway
and we are good to go with that.
and now our Gateway
has been created and showing okay now we need
to see either our light is stable or not stable.
Okay, it will take some few time to send
the data and the light will be stable. And now if you
see here the light is changing and soon
it will be stabilized.
Either you can just restart it by unplugging the
power cable and we are good to go with that.
It will take some few seconds where you can say that one to
two minutes.
And when it will come live it will
show her the devices active.
Yes, now advice has been activated and we
are good to go with that. You can see there and if you
see here the light has been stabilized and
turn into the green and there's a noble blinking.
Okay, and if you see here the last activity 15 seconds
ago here. We are seeing the live data and
or we can put the location.
Manually here because it's not showing right
now on the map, but we can update from the
status message or you can say that.
That allow it. Okay, and it will
automatically patch placement indoor and we
are good to go with that.
To go the yes, we can put the latitude and longitude and then
we will be good to go. But right now I am
not going to put any latitude longitude. So come
back and see and we're getting the life data
here. Okay.
So there are some other options like API Keys live
data location collaborators and we are good
to go with that. Okay. One more thing is that now when we
set up the Gateway in the region, the device
will automatically connect to that because
the things stack.
Will be responsible for device
authentication. So Gateway is like a
GSM network whenever we have.
Moved to the region it will automatically authenticate with
the same authentication. Actually Gateway or
Tower is not authenticating. It's a backend systems
or authenticating the system the same
technique is there that any device
can connect with any Gateway, but the main Network
server and the application server will authenticate all
the stuff. So guys, this is the video where we
set up the Gateway in the next video. We're going to connect mkr1300 to
the things Network. So guys see you in the next video. Have a
good day, bye-bye.