Hello everyone. Welcome back to the video number six point
five. And in this video we're going to
Connect mkr1300 to
the things Network. So guys, let's get started with
that. So firstly we need to set up an application. So just
click on the go to application.
And here click on the create application.
and air provide the application ID the
unique application, for example
mkr when
1300 and sagoda, okay,
and there will be application name.
Mkr when 1300?
so we'll go the
and create a click on create application and
we have a application created Okay now click
on the end devices and here we
need to add the device click on the register and
device.
So here we have a different options scan the end
device QR code or select the Android device from
the list enter and device specific manual
figure. So I'm going to choose that and click
on the Arduino.
Arduino essay and here we
have Arduino. Mkr110 and okay,
that's the version and this is
the same version and the region profile.
That's the region and from here.
We need to choose the
frequency plan, which is sf9 that
we already.
Use for the Gateway and here we need a join eui
of the device. Okay, here is the device.
that I need to connect it with the
system
And we're good to go with that. Just open up
the Arduino it and from the tools and board
and from here.
As AMD boards, okay and
select mk1300 or a 1310 depending
upon which board you have and here's
the port. Okay before moving on we need
to install the library.
for the mkr van
I can type the
mkr van
And here you will get the library. Okay, this is
for the sport library for mcavan 1300 or
1310 provides the PHD communicate with the Laura and the lower
wind networks. Okay. I already have installed. You guys need to install that Library.
It will contain the examples. So now
click on the file examples
and here we have a mcareware. So just
click on the first configuration.
Okay, and we need to upload and
this will provide us device.
Code and we will configure all of
the stuff by using that example.
Code has been uploaded successfully click on the serial Monitor and here
is the device eui. Just
copy that
control C, or you can just right click right click is
not working copy that
and here we need to paste control V.
and confirm and
As the device you can use the same one.
Okay, and then we need to generate the app key
and this is the end device ID. Okay, register
and device.
And we are good to go with that. Okay.
Now the device has been created here. But
again we need to go there.
and
Type R. You connecting wire OT AA or
a BP? So type 1 and press enter
enter app eui.
Okay, so
here is the app UI.
We need to click on the application some care when
and this is the application ID.
Okay.
click on the device
You need to find yes below are the app eui?
Okay copy that.
And control V and press enter. Okay
Enter app key.
So here you need to
Click on copy to clipboard.
Control V and enter okay, and it
will take some time just like a couple
of seconds or minute and it will be good to
go. And now you see here the last activity seven to
eight seconds ago. Now we are good to go with that device and the
data has been coming from the Gateway. Now
you see here. We didn't mention any detail of
the Gateway here it automatically select
the Gateway which is available nearby in the area and
start sending the data because
it's working on that app UI and
the app key and the things network is authenticating all
the stuff. So here's the data is coming click on the
live data and you will see the scheduled data downloading for the
transmission and the messaging you
can send the message from here location allow.
Okay, and there are a
lot of other stuff. Okay, so
Now in this video we understand how to create the
application how to add end devices and there
are some other options like integration. Okay,
after receiving the data where you want to send if you
want to send the data to mqtt broker then
here are the or you can listen the data from
that built-in mqtt broker. Okay, you
can use that specification and this is
the public IPA address. You can say that public domain
for the mqtt without SSL and this is the SSL. This
is the username and click generate new
API key and you will be good to go by the way
in the upcoming sections. You will learn how to use the mqtt. So don't
worry about that. Okay, we have option to send the
data to the webhooks like IFTTT or there
are some other service providers. There's a
complete list where you can send your Laura and device
data to
And these third-party services via webbooks and
storage integration AWS iot
core is also available and it's easy.
You can select the region cloud formation stack name role air
and we're good to go with that as your
iot or you can also use the Laura Cloud to
Are received the data in a proper way. So
guys, this is our complete Laura wind
section where we learned how to send the data P2P and
in the
previous video we set up the Gateway. And in this video we set
up how to send the data how we
can connect with the things Network. Okay, and in
the next video, we're going to talk about pros and
cons of Laura, man, so guys see you in the next video. Have a good day, bye-bye.