So well now we have downloaded the required tools we have set up the colonics and my credit card.
After that we set up the Internet connection from our next door to our Raspberry Pi device.
Then we set up VNC server on our Callimachi.
Right.
And now you have also set up the resolution thing on colonics.
Now we are going to set up our wireless by fire adapter and power settings right.
So these are the two steps which we are going to do now.
So let's just move into our Carly Raspberry Pi device.
So here you can see we are connected with the Internet right now.
So you have to connect our buy less adapter.
So as you can see on the on the list I have connected two wireless adapters and one is the Belgian one
which is in Raspberry Pi tree.
So all I have to do is connect any of the wireless data with my home network so I have to enter a password
or to.
And then I have to connect
for the wireless adaptor is connected now.
Right.
So let me just make it on the correct resolution and let's just open that terminal and do one fake.
So as you can see that line zero is connected with our own natural so.
We are going to connect and other wireless adapter as well.
We again have during the past third
right that's just Quantic again.
So as you can see Lanzi and like but are not connected with our homework.
Since the board Gorga IP.
So then zero IP is what my We've got fanfics it got to 5 got 1.3 as you can see and land one IP is 1
9 2 about 1 6 8 2 5 got 1 and 5 right so let's just do that we have set up the wireless adapter.
And the next thing we have to do is we have to set up the power manager for we have to click on power
manager
and by the way we are sending power managers so that once you start doing our real world scenarios B-B
disconnect from RB into server many time.
And we will keep the breadth of device on for a long time so that we don't lose connection or we don't
lose the system doesn't go into sleep mode.
You have to make sure all these things right.
So all we have to go into system.
And then in ective we have to do never right and display we have to go into display and skip our management.
We just have to turn it off and blank.
Often you have to make it 60 minutes and then you have to go through security and lock.
It's clean.
When system is going to fall asleep we'll just have to check back and you have to select automatically
lock the session.
You just have to rule never right these other settings that you have to do.
So you have to go into power manager then you have to go into display and blank after you have to make
it 60 and turn it off as well.
Right.
And then into security you just have to uncheck that lock screen and automatically lock session tomorrow.
Right.
Then let's just go there our settings are now done.
We are almost finished with our installation and the next studio we are going to see how we can make
our VNC server orto start.
Right.
Right now you have to you know we are giving that connection with that you can afford.
And then we are starting our VNC server to party.
Right.
But the next would you'll be able to see how we can make our VNC server Arto a start when we start our
Raspberry Pi device.
Right.
So let's just see this thing in the next video.