Welcome back everybody.
And in this editorial we will cover some of the network settings where we will be changing our IP address.
Now as we saw in the previous story all if we had I have config you will notice that we get this IP
address which probably does not belong to your local network as you can see it right here if you open
the command prompt from windows
and run the IP country comment.
So IP config you will notice that my IP address is 1 92.
That 168 that one the three.
So you can see that it doesn't even start the same as the IP address of this command.
Now we want to make sure that this the the that the machine gets the same IP address and well not the
same IP address but the same part of the IP address.
And how do we do that.
Well basically just go on machine then settings.
Once you go there scroll down to the network and you will notice that right now it is attached to net.
I believe this is set by default.
And that is basically net network address translations.
So you want to go on the advanced and check if the cable is connected.
So if this is unchecked check it but I believe it is cable connected as default.
And here you want to go to the Bridgette adapter not net but breached adapter and pick your interface
network interface now my network interface that I use is this basically the first one right here for
you it might be named differently.
Not make it probably is named differently and you want to pick the one you want to use.
For example if you want to use a wireless interface a wireless network card you can just plug it in.
Let me just show you for one second here I have my wireless card and I will plug it in in order to show
you how to pick your wireless network interface.
Right here it should be plugged in.
And if we scroll right here let me just close and reopen this.
So if we go to the machine settings and once again the network we should have for right now you remember
we have these three and the wireless LAN network adapter was not here.
Now once you click on the wireless network adapter there is a possibility that it won't be supported
by the clinics for example.
I don't think is so effective here.
OK.
And right now if I reboot my machine which I won't do my wireless card will not work.
I won't be able to connect to the Wi-Fi.
Now yours might work.
So you want to try that.
But in my case this one doesn't work for me.
So I just connect on my piece your cable and make sure once again that the cable is connected and you
just click here.
OK.
Once you pick Bridget that there and once you pick the network interface you want to use click here.
OK.
Now if we type here I have config.
Once again you will notice that now our IP address has changed.
It's not anymore.
It doesn't anymore start with 10 dot 0 2.
It starts with 192 that 168.
That one that five.
And it basically now belongs to our local network IP range as you can see here is top five.
And here is the three we can check by thinking 192.
That's 168.
Not one but three.
And you can see that we will receive packets from our windows machine which means we are on the local
network we can also ping Google dot com in order to check that.
And this will take a few more seconds because our Windows machine is much closer than Google dot com.
And basically this is a virtual machine.
It is all a little slower but in a few seconds we should be receiving the package from Google.
Here we go.
We got to google the IP address.
And right now we should start receiving the packets
here they are.
As you can see we received four packets from Google.
So basically this means we are able to connect to the Internet.
So that's about it.
We just want to set our IP address correctly in order to continue doing some of the other stuff.
So this was rather Russia tutorial in the next one.
I will show you for those who are interested how to burn an eye so clinics image in onto the you be
right for those who want to install it directly on their main P.C. they will need to burn the operating
system onto the you will be driving.
So I hope I see on the next Vittorio and take care.