Hello everybody and welcome back.
And right now we saw how to unzip our vote list that we will use which is rock you that the extreme
need comes pre installed in clinics and we also right now want to actually run our own attack.
We saw the four way handshake in the wash dot cap file.
We also saw the authentication frames in the wall show that kept file and all we need to do right now
is run our attacks.
So let me just change my directory to the directory where I have my file which is this one handshake.
So see the handshake.
We can see it is right here.
Basically if you find this a weird name you can just rename it to anything you want as long as it has
these dot kept file dot cap extension.
And once we do that now we want to run our comment which is air crack.
So just type your aircraft minus and G.
The next thing you want to specify is minus W. and these minus W stands for board list.
And now if you want to specify the name of the wanted list.
Now if you just type your rock you look sexy.
It will not work since the board list is not in our own directory as we can see we only have this file.
So let me just locate it once again rocked you and we can see that it is in this directory right here.
Now I'm not really sure why it says that it is still
unzipped and we can see it is what it is.
It is actually unzipped.
So we go back to the rectory and we start the command.
So minus W and then we specify the path which is user share what lists and then the name of the bird
list which is Rocky you got the exit now.
Now to specify the path to the word that we will use all we need to do after this is specify the name
of the file which is in our case
in our case it is scan minus 0 1 Not really sure why it wanted.
Let me just see.
No networks found exiting.
What you mean with no networks found that traditional riders say this.
What does it mean.
No networks phone No such file or directory of course we are not in our current directory so change
or directory to handshake and let us try once again.
Not really sure how I didn't notice this before.
So let me just clear the screen so it is a little bit prettier so aircraft minus and G minus W. than
the path to the wanted list
which is Rock You The.
And now we specify the name of our file and this is the whole comment.
Once you write and once you typed all of this we press here enter and we can see it started the process
of actually attacking our or brute forcing our six point password.
Now a few things we can see here.
One of them is the transient key master key people H Mack.
Uh the current first passphrase is basically the current passphrase that it is going through the list
that we specified the time left is basically the approximate time left for this to finish the.
Here we can see how many password it already tested from the from all of the passwords which is actually
nine point eight million.
I thought it was around 40 million.
Well I guess I was wrong.
And this right here stands for keys per second which basically stands for only passwords per second.
And the Kleenex machine that I have right here since it is a virtual machine and since it is really
slow only has three hundred and forty or fifty passwords per second which is uh which you will probably
if you run this on any other Linux distribution or any other Linux machine will be a lot faster.
For example this same attack right here on my laptop is uh can go up to four thousand and three hundred
keys per second which will finish this attack in around 30 minutes and not eight hours and 18 minutes.
So it basically all depends of the amount of power that you gave to your little machine.
Since they only gave it one core and my one can't really expect it to be that fast.
So we won't really be waiting for this to finish.
Especially when I know that there really isn't my password in here.
So right now I would put my password somewhere towards the end or not towards the end towards the beginning
and we will see how it looks like when it finds the password.
So let me just control say this and it will quit aircraft.
And now what I want to do is basically in order to show you I will go to my bird lists and I will never
know we're off to the GST which can take some time since it is reading 10 million passwords and it basically
takes time to open that much of text
and then I will add some more.
And then basically I will add in this password lists my own password for the router
so let's wait for this to open.
Shouldn't take too long actually.
Or basically it might actually take too long since this is a virtual machine.
Hopefully on the crash and we can see right here that actually says reading 14 million lines not really
sure why aircraft said that there are nine million passwords when it says right here that there are
40 million passwords since each line is basically one password.
Now what we want to do.
Let me just go right here it is currently a little bit laggy since of course it is still loading the
passwords.
So basically just go a little bit slower
and let us put our password here.
After the Phi Phi Phi Phi.
Now the password is this one for the 40.
My wireless access point.
Let me just wait for it to actually load since it is currently laggy since it is loading a bunch of
these text passwords straight type something.
It won't work.
Let me just wait a little bit before I continue.
Let me just close it once again.
Well basically now we can see that it actually bugged out so
I'm not really sure why.
Actually I am sure why it is a little machine basically crashed while trying to load this.
So what we will do is basically we will use a smaller bowl at list or wait let me just narrow it once
again
and I will put it somewhere at the beginning like fifth password so I no need to scroll down.
Maybe it won't look like that and I will put my own password and you will see that it will find with
air crack the password for the farthest wireless network access point.
No.
Basically in just a few seconds or not a few seconds it will actually find it in less than a second
since I will put it right at the beginning but it is once again reading this file so let us wait for
this to once again finish
and in the next tutorials I will use a small passports password list.
So we do not have to wait this much for this to load.
Uh but just should give it the time as it is really loading these 14 million passwords which is a lot
it actually might sound a lot but you will see that it really isn't that much especially if you're not
running this on a virtual machine for example.
As I said the the speed of the cracking process on my laptop is 4300 passwords per second.
And that is the lowest basically of all of the attacks that we will do.
That is the lowest rate since with my GP you.
It goes up to for you up to one hundred and twenty thousand passwords per second and will perform the
Jeep you attack as well with hash get I will show you that as well after this.
Uh and we can also try to do a rainbow table attack which basically will make your will make basically
a rainbow table from your past for best.
And it will make the process of attacking it with both air crack and both hash get a lot lot faster.
Now this once again bugged out.
So let me just control C or control X
and I will create or not create will find a smaller password list since there is really no point to
opening this file on virtual machine
I thought it would work since on my laptop it opens it in just a few seconds and without problem.
But then I realized that this is a lot slower than my laptop so it will take a lot longer to do that
but hopefully just see if I can close this punctual C doesn't work escape no.
Well basically let me just find.
Let me just close this and reopen it once again and then I will get back to you in a few seconds.
Welcome back everybody.
Uh basically I decided to split this video since it actually took me three times to restart my machine
in order to get it to work.
So if you didn't open that rocket at 65 please don't open it since it might crash your machine if it
is not strong enough.
So let me just open a terminal once again and zoom this in a little bit and let's see the current directory.
We want to go to handshake and go to our file right here.
So we want to create a word list or find the world is that isn't that big so we will just go through
the city our city user share our lists.
We will not use the rocket attacks SeaWorld this let us use the fast track that doesn't really matter.
It has less passwords so let's just open it and let us add our password
right here since they gave us a free spot so why not put it right there.
Now the password for my wireless access point is this one.
So now that we specify this I want to control O then enter and then control C to close control X or
10 my doing a modified buffer answering No this code changes yes we want to say that.
So let me just check once again.
If I put it there it should be.
There it is.
That does delete this free space control and then control x.
Good.
Now that we know that our list will be fast tracked to the 60s so we can run the same attack.
We will air crack
and basically you will see that right now it will find our password in less than a second.
So air crack minus and G then minus W and we specified the path to our wordless so word lists and then
fast track not DST and all we need to specify now is the name of our DOT kept file and if we leave these
to run you can see basically it finished right away and it actually found as we can see right here key
found and our password for my of all of this access point.
It took less than a second to find it.
So and even though it this is even though this is really really slow.
If the password is somewhere towards the beginning this will take.
This will finish basically in no time.
So uh.
In order to post this right here in order to boost the number of the passwords you can crack per minute
uh you can do basically two things either either uh don't use the machine and use Linux distribution
that is double booted with Windows or basically only booted uh as a main operating system on our P.C.
or laptop uh because it will use all of the hardware resources that your machine has in order to perform
this attack which basically for example if I had on my main P.C. uh booted Linux and I ran this same
attack.
I believe this would be around 3000 passwords per second since it won't use only one.
Or it would use all four cores
now the other way is the way to tell will show you in the next video which is basically running the
same attack or not the same attack.
Basically running the brute force attack with GPO which is your graphics card which can perform these
smaller these which basically can perform this attack a lot faster since basically your graph card has
a lot more cores and it can perform the smaller tasks a lot faster than your CPO.
Therefore it will be much faster in process of cracking this password we will use cash cat in order
to do that but you will see in the next video that we will need to do some little modifications to our
file in order to continue with that attack process so after that we will cover how to make out what
lists that could suit you better since you do sometimes you do not want to use the word lazy that you
have pre installed or that you can download on the internet so you will be able to create your own world
lists but all all of that will do in the next lectures.
For now on that is it with the aircraft CPO cracking.
Uh we will continue with hash cat in the next material and I hope I see you there.
Bye.