In this section, we are going to give you an overview of tools which we are going to use throughout
our discourse to these tools are common tools which we are going to use, but there are few specific
tools which we are going to go section wise and we will install or use those tools.
But these rules, which right now I'm going to show you are common tools, which you are going to use
throughout our sections, right?
So let's just start with a very basic tool, which is OEKO-TEX, and this tool is also installed in
our dragon with.
So this is the screen, the first screen of GQ optics.
And first of all, what do you have to do is you just have to configure your as your device for that,
you just have to click on this green button.
What here?
And or how do you can see configure your device?
And I have already selected had got it one device and hacked different devices connected with my system,
as well as you can see it or hear connectors so you can select any device.
But our focus is just on had got one.
So we have just selected heck out of one.
And then you can press, OK.
So this device is selected, then over here you can see frequency in megahertz, so you can change the
frequency by using your mouse so you can do click on the on the bottom of the number here to decrease
the frequency, as you can see and click on the top.
Increase the frequency.
You can also use your keyboard.
To change the frequency, as you can see.
So this is how you can change the frequency.
And let's just.
Click on display button to see if we are receiving the frequency of it here or not.
You just have to click on the Start button.
And you are fully stocked.
So as you can see, it's working fine and there are few other options as well on the right side, so
you can add part of it.
AGC are really just getting what you can see.
And there are some other options as well because we are using negative one out and phenotype is exotics,
which means it can also transmit and receive.
Particular is just for receiving.
But we don't have any transmission option would here.
And already had you can see receiver options and you can change the frequency overhead and the filter
with filter shape as well.
The mode of transmission to right now is narrow, then you can select WSM wire and.
And there are some other options as well.
And then you can change the F50 settings as well.
So if you want to zoom in on some frequency, you just have to use your mouse rollover button and then
you just have to, you just have to be on the on the No.
Your mouse should be on just on the numbers so you can just use your mouse rollover button to zoom in
or zoom out to any frequency as you can see zoom in or zoom out.
I'm using my mouse rollover button.
You can also use frequency zoom over here in 50 settings, if you're if you don't have your mouse rollover
button, you just have a mouse or two buttons, you can use this frequency zoom as well.
White.
So this is a basic or what have you of, you are.
We are going to exclude jihadists in further detail in our coming sections as well.
But this is just a basic overview of G.Q attacks and how you can connect your device with security.
So this is a first tool which you need to know and which you are going to use throughout our different
sections.
And the other tool is as they engine, so it's also a very great tool.
It can not only receive frequency, but it can also transmit frequency as well.
So we are going to see how we can transmit using this tool as well in us coming S..
So all you have to do is you just have to click on this change device option on the top left side just
below the files.
You can click on this button and you can select your device.
Our devices have got a phone, so we just have to select it and just refresh it and audio.
You can see the frequency on which it will receive the frequency, right.
So all you have to do is you just have to click on this start button.
And you can receive frequency, similarly, you can do the Zoom or here as well using your mouse rollover
button.
And you just have to keep your mouth on the numbers to zoom in or zoom out, right?
You just have to keep your mouth on, on the button, on the number who would hear.
So this is all we can receive frequency in as jet engine, that's just also dual frequency transmission
as well.
So for transmission, you have to add sink device, so you have to click on device set.
And what had there is the option add thing device.
You have to click on it.
And you will receive another tab, even which is a transformation that.
Right.
And it's transmitting on the same frequency, let's just change the frequency over here.
So all you have to do is you can use your mouse through your keyboard to change the frequency.
So I'll make it three three five.
Right.
And all ahead on the right side, you can see generals.
So let's just add a general for the transmission.
And we will select WSM modulator.
And let's just keep all the default setting for now, and we will change those settings in our future
videos.
So let's just.
Change the size of it.
And you can click on the play button to transmit the frequency, but let's just click on this play button.
So as you can see, it has started the transformation.
And you can zoom in and see the transformation as well.
The currently Heck Fund is transmitting the frequency on four, three, three five megahertz.
So this is how you can use this tool as jet engine to transmit the frequency as that.
Let me stop it, and let's just close this tool.
And the last will, which we are going to see.
Is The Digger, which is also a great tool, and we are going to use this tool when we will do analog
TV broadcast using our hacked different device, and we will use this particular tool to receive that
analog transmission of TV and see the results over here.
So this is also a great tool for most of these tools have similar settings and button placed on similar
places.
As you can see, the Settings button is always on the top left side and the play button is also in the
top left side.
This is a very common thing in all of these tools, so you can click on the Settings button and first
of all, you can change the frequency.
I'll keep the same frequency in megahertz and what you have, you can see the device.
I'll keep the same device.
You can change the sample rate, I'll keep all the default settings and let's just click OK, and let's
just click on this right button to play so you can see this tool is also working fine.
And we are going to use this tool as well.
What hit the right side at the bottom of the right side, you can see at 50 and again, there are some
50 sightings, which you can see.
So I'm not going to go into details of these 13.
These are almost similar sightings, which we see in you.
So this is the last one.
So this is a basic overview of tools which we are going to use in throughout this course and we will
explore these tools furthermore in our different sections and see what other things are offered in these
tools.
Thank you.