In this section, we are going to see how we can broadcast XM Radio.
And we are going to broadcast using the if device, since this course is all about kind of fun.
So we are just going to use heck out of fun and we are going to do a broadcast of FM so you can broadcast
your life choice as well as well as recorded voice.
So right now, I'm going to use a recorded voice because if if I'm going to do a life voice, then it
will create a noise right now because I'm recording as well.
So that's I will just broadcast this sound.
So we are going to broadcast this sound on FM broadcast, so make sure you have any sample phone, I'm
just using the sample phone.
And the next thing you need is actual audio cable.
Luckily, this cable is already installed with Dragon Oice, so all you have to do is you just have
to run this command.
And I will provide this come on.
So you don't have to have this come on.
This is the come on.
We're the ones who will run this.
Come on.
I have already run this.
Come on.
So let me closer to ones who will run this command and then you will open sound mixture and in output
devices, you will see virtual sync option.
So let me close it and let us just open this file one more time in ventimiglia in two, currently it's
using, uh, let me just posit, so currently it's using our normal speaker to output this audio, right?
So all you have to do is you just have to go into audio and audio devices and order here hair, you
have to select virtual thing.
So in this way, it will output in a virtual audio cable and then we will select in AR as the AR engine,
we will select virtual monitor.
So that will be outputting it to the virtual monitor.
So we will not hear this audio in our speaker, but this audio will be transmitting to as the AR engine.
So this is what virtual cable does.
So next thing you need to know is we will use as Diane Angel to transmit and make sure your had got
a fun device and ideal as they are, dongle is also connected with your system.
If you are using the French system for transmit and receive, then you can connect one system with your
haircut of one and the other system with your ideal as they're doing it since I'm transmitting and receiving
on the same system.
That's why I'm using negative one and as they are doing, put together on the same system.
So let me make sure my devices are connected.
So corruption is connected.
And.
Deal as they are, Dangle is also going to.
And to prosecute, we are going to use the other engine, as you can see.
So all you have to do is you just have to go into device sets and you have to add thing device.
Right for this is the default frequency over here.
Let's just let's just not change the frequency.
And you just have to click this change device option.
It is just below the file, but it's a small button and you just have to click it and you have to select.
Not showing had kind fun to let me cancel it and let us just open it one more time.
So as the engine.
And let us just add thing device and then.
Output will be had a lot of fun.
You have to select heck out of one.
Right.
And this is the frequency on which it's going to broadcast are XM Radio.
Right?
We have already selected a haircut of one device.
And then you have to go on the right side on this channel plus button and you have to click on it.
And then you can add any of these channels, but I will prefer metal at FM band modulator for its voice
is quite clear they'll select metal FM modulator.
And apply.
Then, or how do you have to do a few settings?
First of all, let's just increase the volume to five, which is the maximum.
And let's also increase this volume as well.
The transmitting volume.
Right.
And then on this, Mike Burton, you have to right click and what you will see different output options,
different hardware options, basically for different sound cards and different options.
So at the bottom, you will see virtual think monitor.
You have to like this one and click, OK.
And then let me just zoom the frequency up.
So that's all selected.
And let's just increase.
The volume over here.
Let's just play.
And then you have to click on this audio input button, right?
You have to left click it.
So it will start transmitting.
Then what do you have to do is you just have to click on this really clear so that we will start broadcasting
this sound.
So that's all from the broadcasting side.
Now let's just try to receive this audio and you are.
So let me open, you are.
So GQ Ortex is open now.
And.
Let us just let the frequency on which we are broadcasting to, we are broadcasting on thirty five megahertz.
So let's just select for thirty five.
And let's just play.
So let me make a toast to.
And what you can see, we are receiving that frequency.
But and I've also selected narrowband over here, so that will receive the correct audio.
He.
So if I stop it, then.
Project X will no longer receive that frequency.
And.
As you can see.
So this is how you can broadcast and receive FM radio using your head, got a phone device and ideals
don't.