In this video, you've been asked to configure inter VLAN routing by using a router on a stick. Router
1 needs to be configured to do inter VLAN routing between VLAN 10 and VLAN 20 and thus will act
as a router on a stick in this topology.
You'll need to do the full configuration of this lab to get things working.
VLAN 1 is gonna be configured with subnet 10.1.1.0/24, VLAN 10 with a subnet 10.1.10.0/24.
That's the villain that PC1 belongs to and VLAN 20 is gonna use subnet 10.1.20.0/24.
That's the subnet that PC2 belongs to.
You need to configure the router with the last IP address in each subnet. So configure it with the last
IP address in VLAN 1 10 and 20.
The switch is gonna be configured with IP address 10.1.1.253/24 only, in other words it's only
going to have a management IP address. VLAN 1 is our management VLAN, VLAN 10 and 20 are
our user VLANs.
We need to configure the VLANs on the switch.
So again PC 1 needs to be configured in VLAN 10
PC 2 in VLAN 20.
We need to configure the link between the switch and the router so we need to configure this link properly.
We need to configure these two links properly and then we need to make sure that PC 1 can ping PC
2,
PC 2 can ping PC 1 and can ping the router for additional credit configure the network so that the
PCs can ping the switch and the switch the PCs.
So can you do it?
That's your challenge.
Get this network working download the packet tracer file and see if you can get it working. In the next
video
I'll show you how to configure this network per those instructions.