In this lab, you need to configure network address, translation or net.
We've been told to configure the network as follows We need to configure the router to get an IP address
of via DHCP from the ISP.
So on this interface you need to enable DHCP so that the router gets an IP address from a DHCP server.
You then need to configure the router to allocate IP addresses via DHCP to the clients.
Based on this information, the network to use is ten .1.1.0 slash 24.
The default gateway is the router ten .1.1.254.
The DNS server is going to be 8228822882228.
So you'll need to configure this interface with a static IP address as follows and configure the router
to allocate IP addresses to the PCs.
In this subnet, you then need to configure the router so that internal hosts can access the internet
using NAT or to be specific, port address translation or Pat.
In other words, you need to net these internal hosts to the IP address of the router on gigabit is
001.
Now please note that I've had feedback that I'm not giving all the details or not telling you exactly
what to do.
Now I'm purposely doing that.
I'm trying to get you to make your own decisions about the best way to implement a network.
It's important that when you study for the CCNA exam that you don't just memorize things.
You need to understand what you're doing, and hopefully these labs will force you to do that.
They will get you to think about what you're doing and to troubleshoot any mistakes that you make.
If you want to step by step process of configuring the lab, watch the next video, but otherwise try
and do this yourself.
Download the attached packet, trace a file and see if you can do it yourself.
See these labs as challenges to ensure that you have the knowledge to pass your CCNA exam, but also
to gain real world knowledge that you can implement right away.
So download the packet, trace a file, see if you can do it.
Otherwise, watch the next video where I complete this lab.