OK so now that we configured our buyers properly to boot into the USB stick that has the cubes image
as you can see we managed to successfully boot into cubes and we have the installer right here.
So as you can see right now we have two options.
We can select the first option to go ahead and install cubes straight away or we can go with the second
option to test the hardware that we have first and then install cubes if everything is fine.
So I'm going to go with the second option so I'm gonna press the down arrow and hit enter to first test
the hardware that I have.
And if everything is fine we will go ahead and install cubes perfect.
So we have the installer here which means that we passed all the tests so far.
Now the next steps are actually going to be pretty simple.
First it's asking us for the language I'm going to keep it at English.
You can change it to whatever language you want.
So I'm just going to click on continue here on the bottom right next.
We have a window that allow us to change a number of settings.
You can change the keyboard the time the language.
I'm actually going to keep everything the same.
The only thing that I want to change is under the youth system category in there which is the installation
destination.
This is the location where Cuba is going to be installed too.
And this is the only difference that I've always been talking about between installing cubes to us.
I mean operating system or installing it on a USB stick.
So we're going to click on this to change the setting and this will show us a window that list all the
storage devices connected to this computer.
So the first storage device that I have there on the left you can see the size of it is 9 3 1 gigabytes.
This is the built in hard drive inside my computer.
So if you want to install tales on this hard drive as a main operating system on this computer you'll
need to select this hard drive.
Alternatively if you want to install cubes on a USB stick and then use it as a live operating system
similar to what we were doing with tails.
So you'll be able to connect it to any computer that supports cubes and use it on that computer.
And then when you remove it the computer will be back to using its default operating system.
If you want to do this then Kinect a second USB device to this computer the minimum size of this U.S.
V device should be 32 gigabytes.
As you can see I have one connected to it and it's size is actually 57 gigabytes.
So it's over the minimum.
So all I'm going to do right now is literally just click on this storage device that I want to install
cubes to which is my USP device right here.
As you can see it's 26th right now so it's telling me that this is where cubes is going to be installed
too.
And again keep in mind that when you select a device in here everything's stored on this storage device
will be removed and cubes will be installed there.
So make sure you don't have anything important to you because it will be erased.
So I'm going to click on done there on the top left now cubes by default will encrypt the storage device
that you pick.
So right now it's asking me for a passphrase to use for this encryption we'll be using this password
to unlock the storage device that we picked.
In the future when we want to use cubes.
So I'm going to put my password in here and I'm going to click on Save passphrase now.
In general you should go back to the main menu at this stage in my case the US b device that I picked
is not formatted properly.
I intentionally did this just in case you faced this issue.
So if you're back at the main window this is perfect.
If you've got the same warnings that I have right here then follow what I'm going to do in order to
properly format this storage device and install cubes on it.
So we're going to click on reclaim space here at the bottom right.
We're going to click on delete all and we're going to click on reclaim space and that's it.
We're back at the main window.
And we're good to go.
So we're going to click on begin installation on the bottom right here.
Now like I said this will take some time so be patient with it.
It will even take longer time if you're installing it to a USB stick like I'm doing right now.
So I'm going to pause the video and will resume once the installation is finished.
So now the installation is complete.
We will need to create a user in order to boot into cubes using the USB stick.
So I'm going to click here on user creation.
I'm going to set a user name and then I'm going to set a password.
I'm going to click on done
and right now I'm going to click on finished configuration on the bottom right OK.
Now the configuration is complete.
And as you can see here at the bottom right I can click on reboot to reap with the computer.
And then if I keep the second USB stick connected to the computer it'll automatically put into cubes
because I change the boot order or if I disconnect all the USPS takes a toll booth into the default
operating system that this computer runs on.
So I'm going to click already would and as soon as the computer restarts I will disconnect the first
USB stick.
This one this is the one that I used to install the cubes image and I kept the one the second one the
bigger one connected to the computer and order to good into the cubes operating system.
And as you can see it's automatically booting into cubes.
So it's very important to distinguish between the two USP sticks.
We use one of them in order to install cubes either to the built in harddrive as a main operating system
or to another USB stick.
And then if we installed it on another USB stick the second one will be the one that we use when we
want to boot into the actual operating system.
Right now it's booting into the operating system.
Be patient with it and as it's booting as you can see it's asking me for the disk password.
This is the encryption passphrase that we chose when we installed cubes so I'm going to enter it and
hit enter and just wait for the operating system to start.
Now we're going to click on cubes or ask to set some final options.
I'm going to keep everything to the default settings.
You might want to enable this option if you want to download updates over the network.
I'm going to keep it unchecked because that'll slow it down download an update is usually not banned
so you can just keep this unchecked.
So I'm just going to click on done and wait for cubes to configure the virtual machines needed to run
the whole operating system OK so the configuration is finally complete.
Now this did take some time again and it actually seemed like it froze at some stage there.
So you will get this during the installation process.
It seems like it's stuck at a certain point as long as the mouse is moving then don't turn off the computer
just give it its time.
Be patient with it.
It should finish the installation.
So now everything is done.
I'm going to click on finished configuration here at the bottom right
and perfect.
Now we have the normal log in screen for cubes.
So now in the future all we have to do is connect the second USB stick to the computer that you want
to put cubes from Booth from us B and you will get to the screen.
You want go through the configuration every time.
So put the password that we said here enter and perfect.
Now we are inside the cube desktop.
Now you can see this is very similar to basic Linux interface.
If you have some experience with that you'll be able to easily navigate this if you don't.
Don't worry about it.
We'll talk about it in details in future lectures.
But right now we finished installing cubes as a life operating system to a USB stick.
Now to turn it off we're going to go to the top right click on shut down and click on shut down again.
Now just to show you.
So if I disconnect my second USB stick this one right there.
This is the one that we installed cubes to.
So if I disconnected and start my computer
you'll see that it's going to boot into windows into the operating system that it's used to run before
by default.
So this is the whole point of installing cubes to a USB stick.
We'll be able to connect it to any computer that can run cubes use cubes on that computer and we're.
And when we're done the computer will be back to its original state and we'll be able to take this USB
stick with us anywhere we want and use cubes from it.