Hello and welcome to this new lesson for communication communicational use symbols here and communication
over U S B cable.
This is the cable that we will use to connect the Arduino to the rasberry body.
So let's get started.
For the connection box connect the TO been number 11 as shown in the picture below.
This is a breadboard.
This is rasberry by.
And this is Alade.
We will connect this lead to number 11 in the ball.
The other team member we well connected to ground.
So let's start by using the izing software for creating this simple circuit.
Now here we have a software for fitting circuit simulation and circuit design.
It's called Flight zing.
It's FREE.
You can go get it and download it.
Go to the ceviche.
I trust Billy Boy.
And you will find that we have just been hit by boughts
let's go with the hospital by B.
All the fears that you all are frost bitten by.
You can't choose any of these.
As you can see
OK.
This is the hospital body would be.
Now we need Eilidh
this is
OK.
This is a lead.
We also need a bit board
OK.
Now we have our board we need all this led to this ball.
But before going any further we need to review this connection.
As you can see this spin down.
Ben must be connected to the ground of the Arduino board.
The other ribbon which is this one must be connected in about 11 OK.
Now resumed here you will find that these spin are numbered.
This is number nine eight 11.
This is the number 11 G-B or 11 as you can see.
So we go here and we can connect it with this OK.
That's it.
We made the last bit of connection as you can see here.
We've connected the ground.
They've been number 11 of the last bit about this lead.
This lead will blink when it receives a sentence from the IVD we know next we will talk about the connection
for other items that are separated by configuration.
Thanks for watching this lesson.
If you have any questions please ask in the Q&A board.
This is education and engineering team.