Hardware and software requirements, now we need an ISP 32 ball and we also need an Arduino board.
These are the hardware requirements and we are going to connect that.
Yes, people with Arduino.
But we also need a, uh, let's say, level shifta, because E.S.P deals with three point three volt
while Arduino deals with Five-fold.
And since we need to connect, there are these two balls, Cyrille, we need a converter and we will
explain that in the circuit design section.
Now, you also need wires.
You are spec able to connect your Arduino ball to your computer.
And I know that you speak able to connect your USB port, your computer, and we will need an amputee
broka account.
I will explain how you can do that.
How can you how you can create an account and what is amputee protocol and why we need it.
We will also need an Arduino Arcudi Development Environment, and I'm going to explain how you can install
it and how you can add the libraries.
We need to implement this project now.
Again, there are five to three point three volt level converter to convert.
The signal level is very important in this project.
Otherwise you might damage your board and.
These are the things that you need to have before moving forward, if you just want to gain knowledge,
you can skip the hardware part and keep watching this course.
But if you want to do this practically, you need to have these two boards and the converter as well.
Thanks for sharing this lesson.
See you next.