Now, let's talk about the working principal.
And this setup, we are monitoring the sensor data and interfacing control high relay modules to control
high voltage devices such as mortars, bombs and other things through the blink.
We can remotely monitor various parameters in our garden and we can send controlled signals.
Now, let me show you this in a sketch.
Now we have our E.S.P 32 here.
E.S.P.
32.
And.
Here we have Sonsoles.
Let's say that this is the first sensor, a temperature sensor.
And let's say that we have a human and sincere.
OK, now we have these two sensors now let's say that we have a bump.
And this will be inside our garden.
This will be our garden.
Now, the other side, we have our smartphone.
And we are at work.
Inside our smartphone, we have.
That blink up.
Installed.
And we have a temperature scale and we do the scale.
And on of all the bump.
And alarm system.
Now, the temperature will be shown here.
Let's say that we have 30 degree temperature line, which is 80, so we can enter our blink framework
using Internet connection and our ISP will connect.
Let's say that our house is here or we have a Wi-Fi network here.
Our Espanol all connect to the Internet using our Wi-Fi network or mobile network, so data will be
sent to an Internet server and this Internet server will send the data to the link up that you have
installed in your phone.
Now, once you have all of this information, your app, which is blank, you can monitor your garden
in real time.
You can see the temperature, the humidity, and you can turn on or off the water pump if you feel that
your garden needs more water.
Okay.
This is basically the main idea and the main working principle for this project, and it's very easy
and straightforward.
Now, again, this can be applied to anything else inside your house.
You can monitor a room, adjust your garden to see the temperature inside this room.
You can't control.
If you have an engine inside your house, you can control it.
You can control your doorway if there is motion.
So if motion is detected, you can have motion sensor here and you can tell the blowing up to send you
an alarm on.
Motion is detected and you can even connect a camera.
So it's basically the same working principle.
And we are going to be in a step by step model how to code your ISP 32 and how to set up your blink
to start receiving data from this particular ISP board.
Thanks for watching this one.
This is Ashara from educational engineering team.