Hello and welcome.
Now let's try to turn our code or move our call to our E.S.P board and test this project, go to the
device manager after hooking up your E.S.P board, make sure that it's visible, as you can see, confort.
Now go to the tools.
Make sure that Conforth is.
Connected and choose your board, we are using E.S.P 32.
Difficult Virgin one, now upload your code.
It will take like a minute, and after uploading, we are going to check what's happening using the
serial monitor.
As you can see, it's connecting to come for.
Now it's writing the code three percent and it's moving on.
OK, 1790 100, OK, done uploading now our board has the code, now click here.
As you can see, we did.
Ask the board to bring Dot.
Let me minimize this.
Now, this means that wi fi is not connected, so it will keep printing dots until Wi-Fi is connected.
So let's make sure that we have the Wi-Fi details that it incorrectly Saidee.
Now, this is.
Corbould of D.V..
OK.
And this is the password.
OK, let me check, OK, after checking.
I found that my network name has two spaces after my name asharaf two spaces, TV.
So we need to add the code and two spaces.
Let's upload it again.
OK, it seems like I have another issue, which is that my Wi-Fi network has two spaces here and one
space after many.
So let's go with the same name here from my daughter and let's paste it here.
As you can see, it has one space here, two spaces here.
So let's upload the code one more time.
I could have just cut this part, but I think that you should know that you might have issues connecting
to I find it to your Wi-Fi network and you need to solve these issues.
And the best way is to copy your Wi-Fi network name and password from your router admin page.
OK.
Duncan Barling, now we click here, as you can see, it did connect wi fi is connected this IP address
and it's showing my IP address and it did print the HDTV request data.
You can see.
Now, let's check our database.
Now, as you can see, we haven't received any data on our database, so let's see what is the problem.
Now, an unusual request was is out.
Now, let's first check our database to make sure.
Now, if you have written everything correctly, you should see on this page, when you refresh it,
you should see the values here as you can see the location, one, two.
And here we get value one value to value three.
And the timestamp.
The sensor data and location data are not visible here, usually because we have the name wrong or PSP
file.
So let's first check our database and as you can see in our database, we are not getting these names.
This means that we have a problem with the post data file.
So go to the data file, edit it and make sure that you have the right naming for each of these changes
to the same as in this one.
Now, eSport, as you can see, we have since we have location, so let's share this with Senseor.
And location so sincere and here when you try to censor and the location, we have to do the same for
the location and here we need to add the location.
Now, same for here.
OK, they are looking correctly here.
You need to make sure that they are named the same.
Refresh the page and let's wait for another request.
Let's clear the output.
OK, we did receive another request, we can go back if we will refresh your database, you should see
the values here in your table.
OK, now, as you can see, Touch and Home Office, thus insert name and location are written correctly.
And if you refresh the page here, you will see that we have Touch and Home Office.
And the values from our sensors now, since what can be a sense of sense or attached sensor or any other
type of sensors, and in the next lesson, I will use three touch sensors and send their values to our
Web page.
Thanks for sharing this lesson.
If you have any questions, please ask in the Q&A about.