Now that we know how the basics of OutServe are or how the Web server works and in which mode SB 32
can create a Web server, it's time to connect some leads to E.S.P 32 that we want to control over Wi-Fi.
We need to start by finding a circuit design software.
And I'm going to use Fritzing already explained how to download and install the software.
So here it is now, double click, the uprising that we find so that you can start running the software.
Now go to the breadboard view.
Go ahead and drag to LED's.
You also need to resistors.
And we need, yes, be bold, so right, E.S.P.
Karate aspect 32, but you won't find it, so you have to download it from an online website.
Now to find the SB 32 board library for Fritzing, right, fritzing.
As you can see.
And we can go to the park subnet, this is the world that we are using the word E.S.P, 32 words and
one.
Now, this is the length that you need to download, click on it and you'll have it here.
Now let's open it up with Fritzing, file open and go to downloads.
Open it up.
And here you are.
Here we have the Fritzing Board.
For the E.S.P 32.
The library for the SB 32 board.
Now let's zoom out.
And let's rotate it, OK?
Thate.
Now, first, we need to connect the ground to the ground.
And the three point three fall to the power.
Give it red coloring.
And give this a block, OK?
Now, here we have two lids.
This is the first one.
And.
As you can see, it has two terminals and we need to connect, that is Mr..
Now, each of these terma, when you point your mouse on this sermon, you can see that this is a Gethard
and this is the A..
Now let's connect.
That is Mr..
To this lake, which is the island, and let's connect the cathode.
To talk around.
Same here.
Gethard to ground, and that is a off to the A..
Now the other terminal that is thought to be connected to our board and in this case or in our case,
we need to connect it to.
These two pens.
Dita.
And the five.
Just the coloring make the green.
And great, now we have our eSport connected to LED's, and it will tell these two on or off using our
page and this will be explained in the coding section.
But that's it for now.
This is our very simple schematic, and I will teach you how to control your burbles, input output
pens using the whole page and the coding section.
Thanks for sharing this lesson, if you have any questions, please ask the about and the library for
the people will be added as resources to this lecture so you can easily download it or you can look
it up online.