Now, the start code, let's first verify the code and make sure that we don't have any errors.
OK, Duncan Barling, now we have to go back and write our network name, that society has to be the
same as this network.
It's called Asharaf.
OK, I would fill out this information.
OK, now, once you fill out these information.
Go back and compile your code.
Now, let's go ahead and connect our board.
Now, once you connect the world.
The next step will be going to the tools and selecting the board, make sure that you have selected
the board, which is the IT board.
Do it.
Yes, we have to get version one, then you can simply upload your code.
OK, now you have to create a new access point name I called my access point Ashrafi E.S.P.
And this is the password for this, uh, ISP access point.
And these are IP configurations.
Now, what you need to do once you upload the code is go to the Wi-Fi networks and make sure that you
are connected to this network asharaf ISP or whatever you called it.
Once you write the password, you will be connected to this network and sometimes it doesn't take the
IP configurations that you provided here.
So when you try hoping to open up a browser and write one hundred ninety eight or one six eight zero
one six five, it won't connect.
And to try to figure out what's going on here, you can simply go and click on properties to see the
Wi-Fi network capabilities head down until you see this.
Server address, 192 to 268 for that one.
Let's try this line.
That one, once you click into.
As you can see here we are on our Web page, SB 32, a browser, and these are the two buttons that
we created.
These are the heading one and two.
And we can simply turn that on or off using these buttons.
We have two LEDs and I will concentrate, as you can see in this video on the built and led, which
is going to be number two.
And we already have this button to control it.
And now let's go to the common board so that we can see what's here.
Now, once we open up this page, as you can see, the lids are off and we got this line when you click
on, as you can see, it's telling you that this lid is on.
It's not not my fault.
It's number two.
And as you can see in the video, the blue lid is on.
Now, if you clicked again, the blue lid will be off.
And if we have another connected to PIN number five, it will be on.
And again, it will turn off if we clicked the button again.
So this is how easily you can turn your ISP to our Web server and control it and connect to it.
As an access point, and as you can see, that the bullets turning on and off.
And as you can see, this is the line that was called when we clicked here.
It's that easy.
Again, if you want to the main page, it will print Turn-off bobsleds and print this line.
That's it.
This is how the code works in action.
You can change this.
You can add more, you can add more buttons.
You can change the graphical user interface of that Shyamal code depending on your needs.
If you have any questions, please ask.
And if you aren't able.