Hello and welcome to its annual lesson in what you are going to start introducing the Fusion 360 for
circuit design the first step is going to open up the Fusion 360 go to the start menu click Fusion 360
or you can simply write it find it as you can see this Fusion 360 you must have an active internet connection
as you can see here.
Since most of the software libraries are online and this is an online based software
now we have the user interface.
This is the design or 3d design user interface.
And this is the grade.
We don't want this interface.
We need that circuit design interface.
So go here to the File menu and choose new electronics design.
Now this is that electronic design user interface
as you can see in this corner we have a new schematic reference to an schematic document that you already
have a new PSP and reference to a PCV document.
Now these references will be used later.
There are basically four designs that you already have either from the software or from other softwares
what we need to do now is simply click this icon to create a new schematic.
Now this is the schematic design area and we are going to explain this all these different boxes then
start working on our circuit design now and then if side here we have the design manager and inside
zone manager we have the sheets.
Basically these sheets as you can see this is sheet number one are different circuit designs you can
add more than one sheet in each circuit design.
Now this is the parts less the electronic parts that we are going to use and these are the items last
here.
You can choose what you want to view.
And here you can filter things
now.
This is the design area the white area in the middle.
And these are the controls for this design area as you can so see undo redo zoom in or out or zoom to
fit.
You can also add the grid settings you can turn the grid on or off.
Now feature return the tone you can click Okay.
And as you can see here we have a grid or you can turn it off.
You can choose to show dots and sort of lines as you can see and you can control the size and the multiplication
in millimeters or inch or metal.
Now this is the grid.
I prefer turning it on with lines called.
Now I think that you need to know is that coordination as you can see as my mouse moves.
We can see here two numbers the x and y coordinates as you can see depending on the origin point now
from this manual sidebar toolbar you can switch to PCV document from the schematic document that we
are.
And here you can see more info about this document.
And you can show or hide different things.
This is the grid control like the one we had here.
And this is the display.
You can choose what you need to be displayed.
Depending on the items that you have here is you want so show the model the pens symbols the names the
values the information all the guides.
You can even add new layer and name it something and give it a color.
As you can see here you can hide layoffs by clicking here.
Owe it to them by double clicking.
I know.
Now you can use this to copy this to paste this to read different items.
This is the ad parts icon.
You can click on it and start adding different elements and parts.
You can jack i dialed DoubleClick and you can add that dialed.
We will talk about that in a minute.
Click Okay
okay.
Now as you can see in the past list we have these diodes and once you click one of these parts let's
say that we have selected this or this.
You can see here and the items the pins for that specific date.
So for day one all day one we have two pins which are items for this part and we are working on cheat
one no if you want to have an item you can simply click here and start holding that item as you can
see you come over to whatever you want if you want to rotate it you can do the same thing by clicking
keys and choosing the item that you want to rotate.
You can't even metal.
This item
now if you want to connect different items together you need to choose Danette.
This icon and simply come to one of the two ends and you'll see a circle once UCSF can you can simply
start drawing and that's it.
This is how you can connect two items together.
You can choose the bin mode from this menu and then that case as you can see I have choose the care
mode and we have a case
you can choose any other mode depending on your needs.
As you can see
and the country will this time the ideas and other stuff.
Now if you want to rename any park let's say that we want to rename this one.
You need to choose the name icon.
Click the item that you want to rename.
Let's name it.
You are Nelson.
As you can see now will have
the new name.
One on.
Now as you can see here you can add a label to a specific item and depending on the type of label that
you wish to add you can simply tiers and add additional information as this label.
So you can add another label to any other item and you can add a name that label by simply choosing
that name icon and click the plus sign and rename it with whatever you want.
Now we have the port icon and this icon.
Now you can use this to add different ports.
And if you clicked here you can add a bus and you can even add a new order
you can easily draw the bus line and start connecting elements.
You can start drawing using the mouse lift button and once you are done you can simply press scape now
the simulate menu from its name it can be used for simulation of electronic circuits.
You can simulate any element all you can show simulation overlay on your schematic.
You can even get a voltage meter or face probe as you can see it has a lot of options can add different
models and you can add digital source or outlook source or simply simulate.
Now since we don't have anything here the simulation won't work.
But we will test it out once we create our circuit.
Now in this modified menu you can change the value or split or slice.
This is more like sure thing to change the layout to change how things look.
So we want to really concentrate on this and this is the select menu.
You can click here and select different items you will give them here this menu and you can choose what
you want to show or to hide
now one last thing that we need to mention is the command line.
As you can see here we have click or press control plus Alt key to activate command line mode.
And if you press control plus all you can start typing commands and you can type anything.
There is a list of commands in the Fusion 360 website.
The minting or what you are doing whether you are adding all deleting an item now front to the left
command we can simply delete and press enter.
As you can see that this command was activated.
You can also choose the copy command and the code command will be activated as well.
That's it.
Now as you can see here we have sheet number one.
And here we have sheet number one two you can choose different items.
Document validate automate or library.
But we want to talk about all of these.
We just concentrated on the user interface.
Now if you have any questions regarding anything and this user interface you can ask it in the queue
on table in the next lesson.
I'm going to teach you how you can add different electronic items and how you can easily import new
libraries for other items that are not available.
Thanks for watching.
This is National from educational engineering team.