Well, welcome to the world of Computer-Aided Design.
Solve solid.
Today's session.
You're going to learn how to measure distances between the two entities.
Two points between two ops using the measure to measure two is used to measure the perimeter and angle,
radius and distance between the length points.
So faces and planes and sketches, models, assemblies are measured.
Tool is available in this devaluate.
Come on, manage it.
It's letting it come on manager might not be present by default.
In your case, what you can do is you can right click on any of the command managers and select this
evaluate option from the flower display.
Now, here we have this method to click on.
As I click on the Mazid tube, we have this measure, toolbar district, US thing.
In this measure, two bodies oxa good measurements dropped.
Click on this town narrow.
You can see we have four options here.
Let's find a center to center and select this option.
Now I will select the two circles and see the center, the center distance.
Do Circles is displayed here.
Second option is minimum distance.
This option, I can see the minimum distance between the two Salkeld is displayed, which means the
distance between this quadrant and this quadrant is this.
Maximum distance.
Maximum distance, which is the distance between two outgoing quadrants of the SOCOs is displayed here.
Some distance using this custom distance option.
You can customize the distance calculation options for each selection separately.
Plus, top condition.
Set it to maximum.
Second up condition as set out to M. You can see now for the first stop.
Measurement point is this outer.
Because we have selected a maximum option in this area.
And for the second arc, which is here, we have selected the minimum option.
So this quadrant is selected as a measurement point.
Second thing here is units, precision units.
Precision Bottom is used to set the type of units and they have.
I click on this button, you can see we have this major units decision dialog box, this used document
settings.
Radio button is selected by default.
So the different units in position of the document are used while mentioning that everybody can also
sector type of units and their precision for measuring the entities, set the type of units and their
procedure selectors use custom settings, radio, but other options in this idiotic to run this length
unit dropdown list.
You can set the units and options of linear measurement of the entity.
This dropped down this you can select any type of unit millimeters, Micron's centimeters, he does
feet, inches and so on.
So we have the scientific notation, checkboxes checkbox is selective display the value in scientific
notation, use decimal places.
Spinner is used to control similar equity you see by measuring the interpeace.
I select this used little units, checkbox I can display and measured value in two different units.
I guarantee every primary Lenku it is military does set the second one to 10 inches.
So that is the case with this and, you know, unit dropdown list, click on this dropdown list.
Currently, the angular value can be measured in degrees.
You can select the other options from destruct on list, ASPO your requirement.
This decision, this has been a is used to set the decimal accuracy of angular measurements, presenting
all the better meters in this data box.
Click on Documentum.
They can see the major value is displayed in Amman as well as Ventus.
Next, we have this show, X, Y, Z measurements button, this button is activated by default.
So the dxp y and D and values of the cynic and entities are displayed in the drawing area.
If you deactivate this button, only the distance between the selected entities that will be displayed.
Next thing is this point to point.
But I define this point to point.
Button is activated as it is a venue select two points of what this is of any entity or model.
The distance between the selected points will be displayed in this case.
Distance value is one twenty seven by nine forever.
Next thing is this projected upon button is used to specify the location where the selected entity should
be project.
You can project the selected entity on the screen on a specificly measurement history button is used
to build all the measurements made during the current session of SolidWorks.
Select on this measurement button measurement history data is displayed which will display all the measurements
made during the transition of.
The last button we have here is just speak, send somebody the extensive items he's used to keep the
measurement sensor or the selected measurement, the measurement changes.
Then the software gives an alert message.
This is all about measuring distance between entities.
Thank you for watching.