Though welcome to the world of computer aided design with solid votes.
Today we are going to create this solid model in front of you.
Talk to you inside view of this model I'm given here.
And all the dimensions that are required to create this model are provided in these views and seek to
create this model.
First of all, we need to create this base rectangular feature.
And to create a spectacular feature, we need to create its sketch in the sketching environment.
If we look in the front view, the length of this rectangle is 75 units and the vectors eight units.
So first of all, we need to involve the sitting environment.
Currently, we are in the sketch command manager.
And here we have this sketch to look on the sketch to.
And then choose this front plane as the sketching plane.
Now click on this rectangle to.
From the rectangles type area to this corner rectangle option.
Look at the origin to specify the first point of the rectangle.
Now click anywhere in the drawing area to create a rectangle.
Creating the rectangle.
Choose the smart dimension to.
This line segment and plays the dimension here.
Length value for the rectangle, it's 75 five, its size, type 75.
The added box and Presenta.
Again, select this land segment and face the damage and value.
It's damaged in values.
Eight units, type eight.
And press enter.
So we have created the sketch for the rectangular feature.
Now click on this edit sketch button here.
Get into the board modeling environment of SolidWorks.
Rotate the sketch a bit.
Now go to the features, come on, manager.
Juice extruded boss based tool.
Once you click on the stool, the boss extrude, property manager is involved.
In the direction one rollout, we have this condition dropdown list.
Choose the mid plane option from this dropdown list.
If you see in the side view, the depth of the rectangular feature is 52 units.
So at type 52 in this added box.
I click on this okay button, so we have created this base feature of the modern.
Next thing we need to do is we need to create this part of the model.
If you see in the front view, the radius values for these semicircular abortions is 20 and twelve.
So to create the spot, first of all, we'll create a plane which lies at the center of this face and.
Currently, we are in the features command manager.
And here we have this reference symmetry dropdown list.
Click on it and then choose the plain tool from this dropdown list.
The plane property manager is displayed.
Now, select this face.
And then select.
This face off the base feature in C.
A preview of the.
Lane is created here.
She was the OK button.
So here we have this plane now, which is at Medoff, this face and this face lift, this plane Pop-Up
Menus displayed.
She was the sketch option from this Pop-Up menu.
And see, now we are in the sketching environment.
Now to orient the view.
Mr. Spacebar on your keypad and then choose this.
Normal two option from the orientation ballot box with the circle to.
Great first circle.
Just having a realist value of 20 units.
To the smy dimension to.
Sitting in the circle and place the damage as the radius values 20 units, so the diameter will be 40.
So I'll type 40 and press into.
She was the so-called to the stand, the religious values.
So the diameter value will be 24 units.
My dimensioned to select the inner circle.
James, the damage to value.
Twenty four units as the escape key to get out of the small damage and to rotate the model a bit by
using the middle mouse button, actually by pressing and holding the middle mouse button on this quick
snaps dropdown list and choose this Centrepoint snap option.
Now, select this Centrepoint Outer Circle.
It hold the control key and select center point of this edge.
And see the properties.
Property manager is invoked.
Choose what to call option from this ad relations.
Quando Gilberton.
Again, press the spacebar.
And choose the normal two button from this orientation dialog box.
If you see the center of these circles is at a distance of 40 units from this edge of the base feature,
click on this small damage and tune.
The centerpoint.
Then I would say like this, ich.
Well, the base feature.
And and play the dimension and change it to 40 units.
Is the escape key to get out of the spy dimension tune?
Next thing we need to do is we need to create this puppet can see where this part is.
Ten units.
Create this spot, Mustoe fall and create what they call center lane for these circles.
She was the fourth construction option from the options rollout.
Create a vertical scintillate.
Right, click in the drawing area and choose the select option.
Again, to the line to to the Fort construction site check box and then create a horizontal center line
here.
Select this top edge of the base feature and then choose this colored entities, too, so that we have
a line segment created here at the top edge of the base feature.
Nine walk the line to take on the significance of this circle and.
Yet a line segment like this.
She was the smart damage to.
Like the center line and this line segment changed the dimension value to five units.
Now click on the trim entity's tool and trim this unwanted fat.
So we have crimped the unwanted bought on this side of the motor.
Look on the mirror entities, two entities, two mirror.
This box select this line segment in the middle at about ListBox.
Selecta, scintillate.
Then hit the button.
Again, to the stream entities tool and trimmed, unwanted, but trim.
Property manager is active.
So well trimmed, unwanted, but on the upside of the schedules.
This plot also.
Now, again, choose the length tune and close the sketch here.
Creating the sketch they conducted sketch to.
We'll take the model a bit.
Choose this extruded boss base to.
The condition dropdown list choose the mid plane option.
Seen the top two extrusion values, 40 units.
I put in this box.
On the whole Kim button to get out of the extruded Busby's.
We have created the base feature and this part of the model where we need to create these two rib features.
Left the plane, which we created earlier, and used a sketch button from this menu, but you got into
the sketching environment.
That's the space spa when you keep that disorientation down on books.
Then choose this normal to lighten.
Edge of the base feature.
And then to the convert entities to.
Malali selectees.
After out of the second feature and choose the Kenwood entities to.
Now to the line to
the first point of the line.
Yes, specified the second point, likewise, click here and then Putin won't take a line segment like
this, trim entities to remove the unwanted part of the sketch.
Does escape key to get out of the TRIMM to.
We actually tend to sketch on one side of the and then the ingredient to sketch normal to the screen.
I mean, create a center line like this.
A sketch.
Choose the meter entities to.
Now, look in the mirror at about Redox here and then choose this center like.
Look on the okay button to get out of the mystery into these two.
We have created a sketch footboard the features delete these lines in selecting it and then seeing the
delete key on my keypad at the exit skips button.
Here you choose to extruded box based to next choose to mid plane option from this in condition dropped
on this C thickness of these features.
It's eight units.
So.
Eight in this edit box office and.
Okay, button and see.
We have created this model.
Thank you for watching this week.