Hello, welcome to the world of computer aided design with SolidWorks.
Today, we are going to learn how to add thickness or how to extrude creative sketches in SolidWorks
and see on the screen.
Currently, I'm in the sketching environment of solitudes.
I created the sketch.
The next thing I want to do is I want to add thickness to this sketch.
So first of all, we need to accept the sketching environment.
So in the sketch.
Come on, manager at the extreme left corner.
We have this excerpt sketch button here.
Click on it.
You can see we are out of the sketching environment.
Also created one base feature, one open profile that will help us in understanding the extra two in
a much better way.
Now, after getting out of the sketching environment, go to the features.
Come on, manager really first tool in this command manager is extruded boss paste to look on it as
you click on it to extrude.
Property manager is involved and we are prompted to select a plate, a plan, a face or an edge on which
to sketch for the feature cross section.
The second thing, an existing sketch to use for the feature.
So we have an existing sketch here.
I'll select Bottom Line segment of the sketch.
You can see a preview of the thickness that is added to this outer rectangles displayed.
What we need to do is we need to add this circle to the sketch.
So here in the selected Cantus area, I'm like this ListBox and then I will select this so that the
boss extrude property manager.
We have this from roll out.
This dropdown list contains different options.
Currently, the sketch plate option is chosen.
So the thickness is added right from the plain on Mr. Sketches created.
If you choose this suffix face plain option, select a suffix face.
Plain added box is activated.
So I would select this surface of the existing model here, not the exclusion has started from this
phase of the model.
Third option is Vertex select this option.
And I want that extrusion up to this vertex.
So I'll click on this vertex.
Now I want to extrusion to start from this vertex point.
So I'll click on this vertex.
You can see the model has shifted in alignment to this, but X last option, this dropdown list is offset
option.
They call it can see the offset added boxes here.
And entero value, let's say, 50 units fits into.
From sketching plane extruded feature has shifted by a value of 50 units, also use this reverse direction
button.
If you want the extrusion to be on the other side like this now in the direction von rollout, we have
this and condition dropdown list.
Currently, the blind option is chosen.
What I'll do is I'll select this sketch plain option from this start condition dropped on this.
Now in the direction of under aloud.
We have these different options in this dropdown list.
So I selected two on option in C sketches, extruded back phase of this solid model as we have selected
through our option from this dropdown list.
Up to next.
So the next entity that comes in the way of this extrusion is this face of the model.
So the sketches extruded up to this face of the moon, up the vortex.
I want this sketch to be extruded up to this vertex point.
I'll select this.
What expert can see.
The sketch has gone up to this face because we selected this one takes off the existing model up to
surface.
Now, I want thickness to be added to the sketch.
Up to this face.
Select this face and see the sketches extruded up to this face of the existing model offset from surface
sulfates currently selected is this face of the existing model.
And click on this edit box and I choose this stuff is the offset value is 81.
I'll change it to 20 units.
So from this face, this offset distance value is tied to units.
Up to party with this up to body option selected in this dropdown list, we need to select the body
up to which we want to extrusion.
So let's select this body and you can see the results, the sketches extruded up to this body.
With plane using this option, we can extrude the sketch along both the directions, which will be equally
extruded in either direction and see the depth values to units currently.
Change it to 60 units.
So from this mid plane, the sketches extruded 60 units in this direction and 60 units in this direction.
We can also specify the troughed angle to the exclusion.
So click on the start button and you click on it.
The troughed angle edit box becomes active.
Now you can enter the value, the drafting, the value that you say.
I want a draft angle of 10 degrees.
So I'll type 10.
And press enter and see.
Draft angle of 10 degrees is added to this extrusion by pressing enter.
I got out of the two.
I need to get back to that property manager.
So what I do is select this boss extrude feature and then I would choose the edit feature option from
this loud display in C.
There's a draft angle of 10 degrees light to this model.
You can also select this draft outward checkbox.
The election of draft to be released earlier.
It wasn't in one direction, not the draft as and the outward dedication after getting the draft.
I'll choose this OK button and see.
I also created an open kitchen and I want to extrude this open sketch.
Go to the extra boss space feature to me.
I will select this existing open sketch.
See, we have control ups here.
Earlier we only extruded the sketch in Direxion Box.
You can also add thickness to the model by using this direction to roll out.
So select the checkbox.
And we have the same dropdown list, which was indirection one rule out here.
So this can be added in other direction.
Also now, on selecting this open sketch, you can see a preview of the extruded feature is displayed
because here embossed extrude.
Property manager can feature checkboxes selected the dropdown list made plain option is selected.
So the thickness is added on either side of the sketch.
If I choose this one direction option from this dropdown list, you can see the preview has changed.
It may change the view orientation so that views are clear to us.
You can see in the One Direction option is chosen from this dropdown list.
Thickness is edit only in this direction.
If I choose this mid plane option, I can see the thickness is divided on either side of this sketch.
If I choose the two direction option in C, we have to edit what is available now, plus direction,
which is this direction.
Take this value is 20 units and in the other direction the thickness value is 10 units.
I'll change the other direction value to the center.
Now to thicknesses edit in this directionals.
In this autofill at conures checkbooks to apply Philipot at the corners automatically.
The Phillip value will be five minutes after getting all the barometer's in this box extrude.
Property manager click on this OK button.
See the final model.
So this is how we add thickness to the sketches by using the extruded box based feature to Inside the
box.
Thank you for watching this.