Welcome to the world of computer aided design.
Let's SolidWorks.
Today, we are going to learn how to create extruded cuts and solid votes to create an extra added cut
feature.
We need to create a sketch for the gut feature and then choose this extruded cut tool available in the
features.
Come on, Menaged.
So let us create a sketch for the cut feature first.
So go to this sketch.
Come on Manager.
Choose the sketch tool and I'm going to use this face off to feature as a sketching plate.
Now the sitting in my mental SolidWorks.
Choose this moment to button from the orientation database.
Now I would create a rectangle here.
They contacted sketch option, then go to the features, come on, manager, understand the options
and they extruded cut property manager Ivan create a plane at the middle of this plane and display to
the plane to see this face and then sedate this face.
So we have this plane created here to talk about and now invoke the extruded cartoon.
Now we need to select the sketch.
So here we have this sketch.
A selected can see a preview of the cut is displayed here.
You had this truck dropped on this chair.
And currently the sketch plan option is chosen in this dropdown.
Just so the extra ticket cut is starting from this face because we used this face as the sketch plate.
So if I click the okay button at this stage, I can see.
Kangana portion is cut from this feature.
I'll undo what I just did.
And again, it will take straight cut to select the sketch.
Now, let's see what other options are available in this dropdown list.
So the second tool we have is so face faceplate choose this option.
Now, I would select this creatively.
I should notice that the removal of material is taking place from this plane.
Also, just the depth of the extruded cut by using this adult here.
Was don't give back to the state.
You see, my career is removed from the feature, the material removal started from this fleet.
Again, it will be extruded, got to support and do what we did in the previous day.
They got to select the sketch out.
The other option here is what X?
You can specify any 16 point, Rutledge.
We want to start the extruded cut.
I select this 16 can see the material removal is occurring from display and change the depth of extrusion.
Using this Eddo.
So they can Documentum can see you have created an extruded cut.
Up to the specified dipped.
Control sect, again, invoked to extruded, got to select the sketch.
Last option here we have is offset option because this option.
If I had to offset distance would make it 10.
I want this offset in other directions.
So I choose this.
It was upset.
Pardon?
Now the material removal is taking place at an offset distance of 10 units from this front office and
increased its offset distance to, say, 50.
So from this face at an awesome distance of 50 units, the material removal is taking place.
It took about.
This is the extruded card feature, which we created using the offset option until the set and then
invoked extruded, got to select the sketch.
Also use this direction to check box to create extruded cut in either direction.
Also, the options in this line dropdown list are similar to ones which we did in the extrude property
manager.
So after sitting all the barometer's in the cut extrude property manager, click on the OK button to
create the extruded cut feature.
Thank you for watching this.