Hello.
Welcome to the world of computer aided design with SolidWorks.
Today, we are going to create this model sketch to create this model is giving here and all the dimensions
that are required to create this sketch are also provided here.
Create this model.
First of all, we need to create the base feature and the sketch for the base feature is this circle,
which is having a 3-D value of 50 units.
So they you think this more of the sketch, come on, manager.
We are already in the sketching environment of sorted woods.
So click on this so-called.
There's the centerpoint.
It is values 50.
So click here.
Andreadis value of 50 is displayed along with the cost.
Now we need to create this portion of the sketch.
Diameter for the NASA is 10 units and radius for the outer rock is.
I mean, 10 units.
So click on the circle to.
So, like this quadrant has the center point for the circle.
As the diameter for the circle is 10, so radius will be five.
Now we have to create a circle again at the same center radius value of 10 units.
She was no Caperton now trim the unwanted fact she was the trim entities to and trim despond, this
font disbarred and disbarred.
Now we have to circle this up, located on the circumference of the center.
And number of items are six.
Get out of the trim tool by clicking on this closed item button.
Go to the Selenia sketchpad and drop down and choose circular sketch pattern to.
Entities to factor in.
Now click on the entities to pattern added box and select the circle.
And this outright.
In the number of instances in books and value add six press enter.
Spacing.
Check boxes selected.
So the instances are placed at equal missing value and on the circum friends of the sub.
So click on this.
Okay, but enough.
Let's shift this sketch.
A bit to the left.
Now we have to trim this unwanted fat.
So choose the trim entities to and and this pot to spot the spot.
But this fight and this fight.
Similarly trimmed, unwanted, but.
The site of the sketch.
So we are done creating with this outer part of the sketch.
Now we need to create these three slots in C Central Circle along with these slots run having a diameter
value of seventy units so I can go to the circle, too.
And this time I'll create a circle the radius value of 35 units.
Selects for construction, shake box and head document.
That is first create this flood.
Create this slot.
We need to create these two reference lights, flash reference line is at an angle of 30 degrees with
respect to the horizontal and the second reference line, it's at an angle value of 45 degrees with
respect to the phosphorescence.
After creating these two defense lines, we will get two points of intersection, first one between
this reference line and the circle.
And second one between this reference line and this set.
And these intersection points will act as the start and end points of the slope.
So let us walk the line to what's to fall.
I'll create a horizontal line.
Arcing through the quadrant and centrepoint of the circles.
Select this line and convert it into a construction line by selecting for construction checkbox again
in the line two.
This is the first point.
And the second point will lie on the southern France of this dotted circle.
The able went online tools for the second reference line.
So we have created these two reference lanes, so like the center line created earlier and fix its location
by clicking on this fix option.
And then to document.
And what a smart, dimensioned tool and select this line.
And then the center line.
Plays that angle value.
This angle value is 30 degrees, change disvalue to 31.
Now, again, select this line segment and the center line.
In place, the damage already.
This time the angle value will be 45 plus 30.
Seventy five degrees.
Now select these two line segments by pressing and holding the control keys on your keyboard.
And then.
She this for Construction Checkbook's.
Now we have the Centrepoint start point and end point of the slide.
Choose this Centrepoint out slot to.
This is the center point.
This is the start point.
And.
This one is the end point for the start.
You can see the verdict of the slaughters, 10 units.
As the values are displayed here in Meeta, so this rally is fine.
So we created the first slot after creating the slot as the escape key to get out of the slot to.
I can see in the sketch we need to create two more slots like this and on the sitcom Friends of This
Inner Circle.
So choose the Sirtris sketch pattern two from this dropped out.
And click on the entities to pardon.
Let's folks link this slot.
And in the number of instances, it blocks have changed the value to three.
Then I choose this.
OK.
So we are done with creating the sketch.
Now click on this excerpt sketch tool to get into the part modeling and.
Good features, come on, manager, and choose this extruded boss face to.
The value required extrusion is 20 of the type 20 and hit the Okimoto.
In this way, we have created the solid modern.
You'll rotate it and view it at the desired orientation.
Thank you for watching this video.