Hello, welcome to the world of computer aided design with solid walls.
In today's session, we are going to create this solid part of the front for you.
Top view, inside view of the model.
I'd given you all the dimensions that are required to create this model.
I'm present in these views.
Create this model.
First of all, we need to create this sweep, each of which is the base feature for this model to start
with.
We need to create one optical line which made us 175 units to start with.
We need to create one one take a line.
Made just 175 units.
And one point is on the line, which may just 145 units.
And we need to do it in the sketching environment of solid models.
Click on the sketch command manager.
Next, click on the sketch to link the front flame at the sketching plain.
Choose the line to create one.
What, take a line.
And one horizontal line.
Was a smart dimension to the vertical line segment and changed the value to 175.
And to select the horizontal line segment and change the value to 145 units and presented.
If you see radius value, here is 90 units.
To choose this sketch Phillip Tooltip into the value as 90.
In this edit, box him
entities to fill it up.
This line segment and this lengthy review of the Philip is displayed here.
Now click on the OK.
So we have created the sketch for the basic sweep feature on the silk button.
Next click on this exhibit sketch button to get out of this kitchen and laminate click on this features.
Come on manager and choose.
This script was based to sweep.
Property manager is displayed on the profile and botched rollout.
Select this circular profile radio button into the value of diameter as 97.
In this edit box, select this ten feature checkbox and enter the value of thickness as 16.
In this edit box you can see the thickness thicknesses edit in other dedication, which is something
we do not want.
So click on this.
We will.
Static in button.
Now picked up.
Okay button and the stream feature is created.
Next thing that we need to do is we need to create a flinch at the top end of the week feature.
And if you look in the drawing, Damietta for this outer circle is two 25 units and the thickness value
for this plane is 25 units.
So selling this stuff face on the sweet feature of many is displayed to the sketched button from this
bulb of.
We are into the sketching alignment of solid bones.
There's the spacebar when you keep back and then choose this normal to button from the orientation diatom
with the circle to create a circle.
At this point.
Is to reduce value to twenty five by two
at the diameter values to 25.
So we need to reduce the value to half misconduct goes down.
So if you see we have a certain level at the center of this flinched with the diameter value of sixty
five minutes.
So again, to the circle, to the center
this time changed the radius value to sixty five by two because the close dialogue button.
Now click on the exit sketch button to get out of the sketching.
And when you say extruded boss based tool.
And in this depth edit box type 25.
And there's techniques for this flange is twenty five minutes on the locomotive.
Now we need to create these smaller holes on the flinch.
These holes run across the so-called friends of a circle, which is having a diameter radio one every
five minutes.
Also, the diameter value for this model is this twenty point five units and these holes are eight in
number.
So we need to create these simple rules from the many more go to this insert option that just features.
And then we have this simple rule to click on it.
You're prompted to select a location on a plan, a face for the center of the whole.
I will click anywhere on the top face of this flinch.
Not the depth for this hole is 20 feet and the diameter value is twenty point five.
The okay button to create the whole.
As I said, this whole run through the circumstance of a circle which has a damage to value of one,
a defined goodness.
So we need to look at the whole at its proper location.
So like this whole from the design tree and.
Like this, I did sketch option from the public menubar, you got into the sketching in my.
It's the spacebar on your key back and then choose this moment to select the center of this whole press
and really the control key on your back and select the Origin Point Properties property manager is displayed
on ad relations rollout.
Choose this what they call option.
On the okay button now click on Despond Dimension to.
On the origin link at the center of the whole change this value to one eighty five by two, the diameter
of the circle around the circle, friends of which this molecule runs is one eighty five minutes on
the okay button.
Now we have look at this whole click on the sketch button.
This hole is at that exact location, as we saw.
These ones are ACON number.
Now go to the Selenia back and drop down to the circular pattern to.
They showed this equal spacing.
But he selected him.
And then the number of instances added box make showed a value of eight is dim features to a pattern.
Is this full feature, like in this pattern X is eight box and then select this base of the flange on
the ocular.
Of Falls is created on the Flinch Similarily.
We need to create this flange on this site.
Also this time, Selek.
This phase of the basic sweep feature.
And choose the sketch button from this pop up menu button.
It's the spacebar on your keypad and choose the normal two button.
Circle at the center point.
Change the radius value two to twenty five by two and click on the okay button in create a circle the
diameter value of sixty five units.
You find a way to conduct closed down 12.
Gone to a good sketch button, ended up pop Marlink and landed like Onda extruded boss based feature
to make the sketch, make the inner circle.
Also you see in the distance, it invokes already a value of creative finest to so click on the okay
button to create this extruded feature.
Now, all we need to create the holes like we created the stuff, flinch, insert each us, and here
we have this simple tool here.
I want to create holes on this face.
So I was sitting this face
depth for the whole just is twenty five minutes, which is fine.
And diameter is twenty point five units day twenty point five in this edit box.
Then click on this.
OK.
Select this whole feature from the design tree and choose this edit sketch button from the public menu.
Yeah, I'm just sketching environment.
There's the space Bob.
Then choose this moment to button from the orientation title press and hold the control key on your
key back.
So like the center of this whole select origin and choose this particular option.
The okay button from the properties property manager do the small damage to select these two once.
This value will be one 85 by two back on the okay button.
We have located this call also on the exit sketch button to get out of the kitchen and management.
Will the circular pattern tool from this dropdown?
Well, the values are set here.
We need to select the features to baton each and that we need to baton is this whole.
Next, click on this battle Nix's and invokes and then select this phrase.
They can document you have created the balls on this flinch also.
Next thing we need to do is we need to create this extruder feature.
Can see this face of the feature is at a distance of 240 units from this end.
I'm going to create a plane which is at a distance of 240 units from this face of the flinch.
Go to the reference geometry dropdown.
And here we have this plane to Austria, France as this phase of the Lynge.
We want to splain on the other side.
So select this flip offset checkbook's.
Change the distance value to 240 Europes.
Click on.
OK.
Here is the plane just required to create this extruded.
But the this plane.
The sketch option from the public man.
The want to keep bad and then choose this moment to abandon.
If you see the damage or value for this outer secular parties, 50 units.
So I'm going to create a circle using the circle to.
Dilute the value of 50 units, like the radius value here as 25 units.
A tip sketch button from the features, come on, manager to this extruded boss base to.
The direction when roll out from this condition, drop dropdown list.
Take this up to next option, then click on this Occupy.
This think that we need to do this, we need to create a comfortable boat, which is having a boat diameter
of 30, 40 units and vote them out of 28 units and the whole diameter is 20 units.
So you only have this whole result dropped down in the hole was up to.
The whole type area just hold tight.
Is comfortable.
Make sure it is selected.
Also, make sure the show does stem sizing.
Checkboxes selected him.
All the values are secure, like the two who are diameter is 20 units.
Countable diameter is 24 units.
And the comfortable depths?
Twenty eight units.
We just need to select the face on which we want to create this outer board.
Select this face.
Extruded feature game playing at the center of this cannot extruded feature on the okay button to create
this comfortable.
That's the space, keep on, keep back and choose this isometric button.
You can hide the visibility of this plane by selecting it and then thinking on this height option in
this way.
We have created this thought model.
Thank you for watching this reading.