Hello, welcome to the world of computer aided design with solid looks.
In today's session, you are going to create the cover offer here.
Try it.
Create this model.
You are going to used the surface modeling tools of creating the sulphates model.
You are going to add wall thickness to it.
All the required fields and dimensions to create this model.
Given you in this image file.
And this image file is available in the resource section for download.
Need to keep this inmate's file open while creating the model for dimension's.
Create this model.
First of all, we need to create this base feature of the model.
And this base feature will be created using the lofted surface, too.
So let's get started.
We are in the path modeling and alignment of solid votes create the base feature.
First, we need to create three planes, had an offset distance from the right plane.
Go to this reference cemetery, drop down and choose this plane.
Now, the first reference added box is active here in the plane.
Property manager got to this feature manager, design three button and choose this right plane as the
first reference.
Sector distance value 275.
There's the OK button again to the plane to this time, set the distance value to 50.
Now change this number of planes to create added box value to two.
And then click on the Occupy.
We have created three planes here.
I turn on the display of right plane by selecting it and then choosing this show option from the public,
then.
Like this white flame as the sketching plane and the sketching environment.
Now to this Centrepoint aag to.
This is the center point, first point and.
Second point.
Change the radius value for this up to 20 and change the angle value to 180 degrees.
On the okay button.
And set the skating environment.
I think the second plane, and it will be sketching enlightenment.
Was just normal to button after walking the orientation dialogue.
Again, she was the point out to.
Centrepoint.
West Point and second point.
Seen the latest value tutty this time.
It is 180 degrees.
On the Occupy.
Again, into sketching enlightenment.
To the next plane, which is plane to.
Discussing and lament, just spacebar and then to this normal 20.
Again, look this up to Centrepoint.
Last point, and this is the second point.
Change the latest value to terrify.
And the value is 180 degrees.
Like on the occupied.
Into sketching enlightenment.
Then choose this plain and book, The Sketching Enlightenment.
Again, in the orientation dialogue until this moment, too, but.
The centerpoint up to.
That's point second point.
This time change the latest value.
Twenty five units.
And again, the angle value to 180 degrees.
Look on the okay button.
We have created the cross sections for the loftier surface.
We want to create.
Now we need to create the guide goals.
Now to the top plane and invoke the sketching environment.
There's the space bar and then to just normal two button.
We need to create the guide Ko's.
This time, choose three point.
Up to.
Ops like this.
And three.
Click on the closed output now rotate the sketch a bit.
So at this point of the sketch, is it hold the control key intellect at this point is the coincident
option from the ad relations for select.
This point of the sketch and then press the control key and select.
This point from the sketch.
Choose the coincident option.
Now, select this point and then select this point of the.
Like this much option.
Now, select this point and and hold the control key.
Then select this point.
The coincident option.
So, like at this point, listen, hold the control key, then select this point in choose the merge
option.
Make this point, listen to the control key like this point and choose the coincident option.
Check on the occupant of two, despite damage to.
Change the radius value of first up to one twenty five minutes.
Likewise, change the radius value of these arcs to 125 units each.
Click on the button again, press the spacebar and change the view back to nob.
Now to the meter entities to select these three arts.
Now, look in the middle, about eight a box and go to this feature manager design tree, then select
Frontline at the middle of the like on the Occupy.
We have created the cross sections as well as the guide codes.
I did the sketching enlightenment and choose this.
Laughter sulphates to from this office as command manager.
Now we need to select the profiles, select this one, this one, this one and this one.
Now click in the guide kills added box.
Select this, OK, this sock and this up like on this OK button.
Now we need to select the guide codes on the other end.
This OK, this, OK, and this, OK.
Like on the OK button.
Again, click on the OK button to exit the surface loft property manager.
We have created this base feature.
On Select This Plane three sketching plane.
Now, select this.
OK.
I'll select this, OK, and choose this what entities to.
And see, we have extracted the girl now you the line tool and select this point and this point to create
a line segment.
Now we have created a line segment.
Would the surface come on, manager, and choose this leaner surface to.
And see, a preview of the planner's office is generated here, like on the Occupy.
So a planner, so face is created here.
Next thing we need to do is we need to create a handle on this model.
For that, we need to create two sections and then use the loft surface to create the loft feature.
Let's cross section will be created on a plane which is at an offset distance of hundred units from
the Franklin, so go to this reference geometry, drop down and choose this plane to.
Plus, reference to creature manager design, create and choose this friendly.
James, the offset distance, two hundred units enter and click on the occupant.
Now, select this, frankly, at sketching, playing.
And invoked the skating enlightenment.
That the spacebar and to this normal Tibetan.
Now, create a sketch like this using the line to.
Again, in line to this time Tuesdays for construction checkbox and create to what they call line segments.
Sorry, I forgot to choose the Ford construction checkbox this time, so I select this Lane segment.
Line properties.
Property managers displayed like this for constructed checkbox available in the options ruled.
The condo came under.
Now, select this point and then press and hold the control key and select this bottom edge.
Then choose this coincident option.
Again, select this point, will the control key and select this bottom image of the incident, the
coincident option?
Now, in the smart dimensioned to.
Like this line segment, like this line and changed angles valued to five degrees.
Malali, like this one and this one and change the annual value mean into five degrees.
At this point, this point changed Disvalue to 25 units.
It's like this top edge and select this bottom edge and changed this value to 10 units.
This edge.
So make this point and change the value.
Fifteen units.
Now, exhibit A sketching in lab.
Now, select this front lane and involve the skating environment.
Is the spacebar.
Number two button.
Draw the profile on the front, please.
All the line to.
V8.
It's like this.
So, like, this point doesn't hold the control key.
So this bottom edge to the coincident option.
At this point, prison hold the control key, so like this edge and again, choose the coincident option.
Well, the smart damaging to.
So the Ghislaine segment is the diminishing value and change it to 17 units.
So like this point and select this edge.
Is the damage in value and change it to forty three point five zero units?
At this point and selective search and change the value to six point five zero units.
Exhibit the sketching and lament.
In a the laughter surface to.
First section is selected, select this second one and click on the okay button.
We have created this loft herself is.
Now, again, use this plane for.
As the sketching thing.
And then look, sketching and lament.
Let's hold the control key, select this edge, this edge and.
They can convert entities to.
We have extracted the edges using the convert entities to invoke the line to.
On this point and click on this point to create.
Closed sketch.
Now in the plenitude from the self-assessed command manager.
We had Splendors office to see a preview of the planners office is generated here, like on the occupied.
You have created this plainness office.
Next, we need to trim this park.
We'll click on the tramp's office to select this mutual radio button.
Now we have to select the trimmings of phrases like this one and this one.
Like in and this is to keep it box.
So slick, this spot and select.
This spot.
Back on the occupant.
We have trimmed the unwanted part from the model.
Next thing that we need to do is we need to create the grips on the hand of.
So like this top plane and go to the sketching environment.
There's the space bar until this moment to.
Now, look on this stool and create three ellipses like this.
Can one?
And we have this turtledoves.
Take the model a bit.
Like the central first ellipse doesn't hold the control key.
Select this image.
Then select the coincident option.
Ladley, Celenk, at this point.
We will control key and select this edge to the coincident option.
Lastly, select this point.
And will the control key.
Then select this age.
Coincident option.
On the OK button, again, switch back to the normal view.
Now select this flustered lips.
He introduced one value to six units.
She's the radius to value to three point five minutes to reflect to the image file or dimensions.
And that image file is available in the resource section for download.
Containing these barometer's.
Like on the Occupy select this Elipse change story, this one value six point five.
In the radius to value 4.5.
On the okay button, the third Elipse.
It is one value will be seven point five in this case.
And radius to valley will be five units in this case.
Look on the argument.
Now, in the smart dimensions to.
So this plane full and then this centerpoint of the first Elipse is the damage and value and change
it to 16 units.
Games like this plane and then select the centerpoint of second Elipse.
This time, the damage and value is tutted to.
Likewise, you have the stamina and value equal to 50 units.
Now, isn't this discussing in one?
Well, the EXTRUDERS office to then select these three ellipses.
Jeez, the depth value to twenty five units.
Like on the Occupy.
Now we need to trim the unwanted fat.
We'll take the model bit like this.
On this trim self is tool.
Make sure this mutual radio button is selected in the trim type rollout.
Offices edit box is active.
Select these three extruded surfaces and then select this base feature like in the pieces to keep added
box.
Intellect in abortions like this.
And select this base feature almost like on the OK button.
In sea, you have created the grips on the hand.
Now we need to create a dip on the upper surface of the base, selfies.
We've got the top plain and nobody's getting in the spacebar and click on this snowman to better.
Now click on this ellipse to create an ellipse in line.
With the origin point.
Change the radius, one value tutty units.
And radius to value to seventeen point five.
On the OK button.
Well, despite dimension to.
This plane.
Distance to the center of the Ellipse is 119.
Now, Xynthia, sketching environment.
Go to curves and to this project, go to.
It's 11:00 is already selected.
Now we need to select the projection phase on which we want to project the sketch.
So I'm going to select this phase and this phase of the base.
So phase feature like on the okay button.
So go to this reference to Mary dropdown and choose the plane to.
First reference.
Boxes.
Active.
Go to this feature manager design, create and choose the top topline as the first reference.
Change this offset distance value to twenty nine units.
Link on the okay button.
Now, select this newly created plane and it will be sketching in one.
Mr. Spacebar, and then choose just normal to button.
Now create another Elipse in line with the origin.
Like this.
Radius one value is 25.
Radius to value is thirteen point five units.
Again, it will, despite damage in two to this plane and center of this ellipse and change the distance
value two one one nine minutes.
Sketching environment in the lofted surface to.
First section is selected to select the skitch.
Can the OK button now?
We need to trim the unwanted, but.
Click on the stream surface to.
Trimmings, officers and boxes active.
So select this newly created loft feature.
Now click the pieces to keep added box.
Make sure the standard radio button is selected here.
And see, after selecting the standard radio button, the piece is to keep it in box becomes active
automatically.
Select this race surface and click on the ocular.
In see unwanted portion is gone from the bottom.
Now select the business office tool and select these two elliptical edges.
On the OK button.
Well, we have created a plan, a Sophies.
Now we need to create air on the planer Sofie's.
Choose this Lane five sketching enlightenment.
The spacebar.
And to this moment about.
Now invoke this strange slok to.
And create two slots here.
Like this.
On the.
Now, double click on this value and change it to twenty eight units.
Don't click on this one and change it to create two units.
Change these values to three minutes.
In the smart dimensioned tool and slinked this edge and this edge, Jane Disvalue to 2.5.
Now, select this board to match and then.
So like this, what is in point?
Seed is valued to.
This plane and select this centrepoint.
Changed his value to one one nine units.
Now, in all the myriad entities, two entities timyra we need to select these slots.
Wrote about.
Go to this beach, manage your design, create and choose this front.
It on the Occupy.
Now we need to trim the unwanted part to go to the still faces.
Come on, Manager.
Choose this trim surface to.
Standard radio button is selected here.
Office is also selected.
Now we need to select the pieces to keep.
So I'm going to select on this plane ourselves.
We can document.
So we have created.
Went on the plana surface.
Next, we need to get all the surfaces together.
So click on this snits office to select them, face office, select a slotted feature.
This one is one.
Make sure every cell faces selected back on the Occupy.
Next, we need to add Phillips to this more than.
Phillip Toole.
Change the radius value to 40 units.
It's like this edge.
This edge, this one.
This one.
He says this edge.
Upon selecting the edges.
After selecting all day, just click on Documented.
Now, the sulphates model is really.
Next thing we need to do is we need to add thickness to the surface model.
So click on this taken to.
By default, this Finnick one is.
Later in the edited books, selected and right, click on it.
And to the delete option.
Make select.
This model.
Change the thickness value to one them and make sure this taken side to button is selected.
X click on the okay button.
That's the spacebar on your keypad and then choose this isometric buddy.
The better visibility of model turn off the display of these planes.
So here we have the final model.
Thank you for watching the media.